Storage-Users Service Configuration

Introduction

The Infinite Scale Storage-Users service

Default Values

  • Storage-Users listens on port 9157 by default.

Deprecated Metadata Backend

Starting with Infinite Scale version 3.0.0, the default backend for metadata switched to messagepack. If the setting STORAGE_USERS_OCIS_METADATA_BACKEND has not been defined manually, the backend will be migrated to messagepack automatically. Although it is still possible to manually configure xattrs, this setting should not be used anymore as it will be removed in a later version.

Graceful Shutdown

With Infinite Scale, you can define a graceful shutdown period for the storage-users service.

The graceful shutdown period is only applicable if the storage-users service runs as standalone service. It does not apply if the storage-users service runs as part of the single binary or as single Docker environment. To build an environment where the storage-users service runs as a standalone service, you must start two instances, one without the storage-users service and one only with the the storage-users service. Note that both instances must be able to communicate on the same network.

When hard-stopping Infinite Scale, for example with the kill <pid> command (SIGKILL), it is possible and likely that not all data from the decomposedfs (metadata) has been written to the storage which may result in an inconsistent decomposedfs. When gracefully shutting down Infinite Scale, using a command like SIGTERM, the process will no longer accept any write requests from other services and will try to write the internal open requests which can take an undefined duration based on many factors. To mitigate that situation, the following things have been implemented:

  • With the value of the environment variable STORAGE_USERS_GRACEFUL_SHUTDOWN_TIMEOUT, the storage-users service will delay its shutdown giving it time to finalize writing necessary data. This delay can be necessary if there is a lot of data to be saved and/or if storage access/thruput is slow. In such a case you would receive an error log entry informing you that not all data could be saved in time. To prevent such occurrences, you must increase the default value.

  • If a shutdown error has been logged, the command-line maintenance tool Inspect and Manipulate Node Metadata can help to fix the issue. Please contact support for details.

CLI Commands

For any command listed, use --help to get more details and possible options and arguments.

To authenticate CLI commands use:

  • OCIS_SERVICE_ACCOUNT_SECRET=<acc-secret> and

  • OCIS_SERVICE_ACCOUNT_ID=<acc-id>.

The storage-users CLI tool uses the default address to establish the connection to the gateway service. If the connection fails, check your custom gateway service GATEWAY_GRPC_ADDR configuration and set the same address in storage-users OCIS_GATEWAY_GRPC_ADDR or STORAGE_USERS_GATEWAY_GRPC_ADDR.

Manage Unfinished Uploads

When using Infinite Scale as user storage, a directory named storage/users/uploads can be found in the Infinite Scale data folder. This is an intermediate directory based on TUS which is an open protocol for resumable uploads. Each upload consists of a blob and a blob.info file. Note that the term blob is just a placeholder.

  • If an upload succeeds, the blob file will be moved to the target and the blob.info file will be deleted.

  • In case of incomplete uploads, the blob and blob.info files will continue to recieve data until either the upload succeeds in time or the upload expires based on the STORAGE_USERS_UPLOAD_EXPIRATION variable, see the table below for details.

  • In case of expired uploads, the blob and blob.info files will not be removed automatically. Thus a lot of data can pile up over time wasting storage space.

  • In the rare case of a failure, after the upload succeeded but the file was not moved to its target location, which can happen when postprocessing fails, the situation is the same as with expired uploads.

Example cases for expired uploads
  • When a user uploads a big file but the file exceeds the user-quota, the upload can’t be moved to the target after it has finished. The file stays at the upload location until it is manually cleared.

  • If the bandwith is limited and the file to transfer can’t be transferred completely before the upload expiration time is reached, the file expires and can’t be processed.

  • If the upload was technically successful, but the postprocessing step failed due to an internal error, it will not get further processed. See the procedure in the Resume Post-Processing documentation for details how to solve this.

There are two commands available to manage unfinished uploads
ocis storage-users uploads <command>
COMMANDS:
   sessions  Print a list of upload sessions
   clean     Clean up leftovers from expired uploads

Manage Trash-Bin Items

This command set provides commands to get an overview of trash-bin items, restore items and purge old items of personal spaces and project spaces (spaces that have been created manually). trash-bin commands require a spaceID as parameter. See Listing Space IDs for details of how to get them.

ocis storage-users trash-bin <command>
COMMANDS:
   purge-expired  Purge expired trash-bin items
   list           Print a list of all trash-bin items of a space.
   restore-all    Restore all trash-bin items for a space.
   restore        Restore a trash-bin item by ID.

Purge Expired

Purge all expired items from the trash-bin.

ocis storage-users trash-bin purge-expired

The behaviour of the purge-expired command can be configured by using the following environment variables.

  • STORAGE_USERS_PURGE_TRASH_BIN_USER_ID
    Used to obtain space trash-bin information and takes the system admin user as the default which is the OCIS_ADMIN_USER_ID but can be set individually. It should be noted, that the OCIS_ADMIN_USER_ID is only assigned automatically when using the single binary deployment and must be manually assigned in all other deployments. The command only considers spaces to which the assigned user has access and delete permission.

  • STORAGE_USERS_PURGE_TRASH_BIN_PERSONAL_DELETE_BEFORE
    Has a default value of 720h which equals 30 days. This means, the command will delete all files older than 30 days. The value is human-readable, for valid values see the duration type described in the Environment Variable Types. A value of 0 is equivalent to disable and prevents the deletion of personal space trash-bin files.

  • STORAGE_USERS_PURGE_TRASH_BIN_PROJECT_DELETE_BEFORE
    Has a default value of 720h which equals 30 days. This means, the command will delete all files older than 30 days. The value is human-readable, for valid values see the duration type described in the Environment Variable Types. A value of 0 is equivalent to disable and prevents the deletion of project space trash-bin files.

List and Restore Trash-Bins Items

The variable STORAGE_USERS_CLI_MAX_ATTEMPTS_RENAME_FILE defines a maximum number of attempts to rename a file when the admin restores the file with the CLI option --option keep-both to an existing destination with the same name.

Print a list of all trash-bin items of a space
ocis storage-users trash-bin list
Restore all trash-bin items for a space
ocis storage-users trash-bin restore-all
Restore a trash-bin item by ID
ocis storage-users trash-bin restore

Event Bus Configuration

The Infinite Scale event bus can be configured by a set of environment variables.

  • If you are using a binary installation as described in Binary Setup or Bare Metal with systemd, the address of the event bus OCIS_EVENTS_ENDPOINT is predefined as localhost address without the need for further configuration, but changable on demand.

  • In case of an orchestrated installation like with Docker or Kubernetes, the event bus must be an external service for scalability like a Redis Sentinel cluster or a key-value-store NATS JetStream. Both named stores are supported and also used in Caching and Persistence. The store used is not part of the Infinite Scale installation and must be separately provided and configured.

  • Note that from a configuration point of view, caching and persistence are independent of the event bus configuration.

Note that for each global environment variable, a service-based one might be available additionally. For precedences see Environment Variable Notes. Check the configuration section below.

Without the aim of completeness, see the list of environment variables to configure the event bus:

Envvar Description

OCIS_EVENTS_ENDPOINT

The address of the event system.

OCIS_EVENTS_CLUSTER

The clusterID of the event system. Mandatory when using NATS as event system.

OCIS_EVENTS_ENABLE_TLS

Enable TLS for the connection to the events broker.

OCIS_INSECURE

Whether to verify the server TLS certificates.

OCIS_EVENTS_AUTH_USERNAME

The username to authenticate with the events broker.

OCIS_EVENTS_AUTH_PASSWORD

The password to authenticate with the events broker.

Caching

The storage-users service caches stat, metadata and uuids of files and folders via the configured stores.

The storage-users service can use a configured store via the global OCIS_CACHE_STORE environment variable.

Note that for each global environment variable, a service-based one might be available additionally. For precedences see Environment Variable Notes. Check the configuration section below. Supported stores are:

Store Type Description

memory

Basic in-memory store and the default.

redis-sentinel

Stores data in a configured Redis Sentinel cluster.

nats-js-kv

Stores data using key-value-store feature of NATS JetStream.

noop

Stores nothing. Useful for testing. Not recommended in production environments.

ocmem

(deprecated) Advanced in-memory store allowing max size.

redis

(deprecated) Stores data in a configured Redis cluster.

etcd

(deprecated) Stores data in a configured etcd cluster.

nats-js

(deprecated) Stores data using the key-value-store feature of NATS JetStream.

Other store types may work but are currently not supported.

The storage-users service can only be scaled if not using the memory store and the stores are configured identically over all instances!
If you have used one of the deprecated stores of a former version, you should reconfigure to use one of the supported ones as the deprecated stores will be removed in a later version.
Store specific notes
  • When using redis-sentinel:
    The Redis master to use is configured via e.g. OCIS_CACHE_STORE_NODES in the form of <sentinel-host>:<sentinel-port>/<redis-master> like 10.10.0.200:26379/mymaster.

  • When using nats-js-kv:

    • It is recommended to set OCIS_CACHE_STORE_NODES to the same value as OCIS_EVENTS_ENDPOINT. That way the cache uses the same nats instance as the event bus.

    • Authentication can be added, if configured, via OCIS_CACHE_AUTH_USERNAME and OCIS_CACHE_AUTH_PASSWORD.

    • It is possible to set OCIS_CACHE_DISABLE_PERSISTENCE to instruct nats to not persist cache data on disc.

Resource Optimisation

See the General Storage Considerations and Settings documentation for details configuring the STORAGE_USERS_OCIS_MAX_CONCURRENCY environment variable.

Configuration

Environment Variables

The storage-users service is configured via the following environment variables. Read the Environment Variable Types documentation for important details.

  • 5.0.2

Environment variables for the storage-users service
Name Type Default Value Description

OCIS_TRACING_ENABLED
STORAGE_USERS_TRACING_ENABLED

bool

false

Activates tracing.

OCIS_TRACING_TYPE
STORAGE_USERS_TRACING_TYPE

string

The type of tracing. Defaults to '', which is the same as 'jaeger'. Allowed tracing types are 'jaeger' and '' as of now.

OCIS_TRACING_ENDPOINT
STORAGE_USERS_TRACING_ENDPOINT

string

The endpoint of the tracing agent.

OCIS_TRACING_COLLECTOR
STORAGE_USERS_TRACING_COLLECTOR

string

The HTTP endpoint for sending spans directly to a collector, i.e. http://jaeger-collector:14268/api/traces. Only used if the tracing endpoint is unset.

OCIS_LOG_LEVEL
STORAGE_USERS_LOG_LEVEL

string

The log level. Valid values are: 'panic', 'fatal', 'error', 'warn', 'info', 'debug', 'trace'.

OCIS_LOG_PRETTY
STORAGE_USERS_LOG_PRETTY

bool

false

Activates pretty log output.

OCIS_LOG_COLOR
STORAGE_USERS_LOG_COLOR

bool

false

Activates colorized log output.

OCIS_LOG_FILE
STORAGE_USERS_LOG_FILE

string

The path to the log file. Activates logging to this file if set.

STORAGE_USERS_DEBUG_ADDR

string

127.0.0.1:9159

Bind address of the debug server, where metrics, health, config and debug endpoints will be exposed.

STORAGE_USERS_DEBUG_TOKEN

string

Token to secure the metrics endpoint.

STORAGE_USERS_DEBUG_PPROF

bool

false

Enables pprof, which can be used for profiling.

STORAGE_USERS_DEBUG_ZPAGES

bool

false

Enables zpages, which can be used for collecting and viewing in-memory traces.

STORAGE_USERS_GRPC_ADDR

string

127.0.0.1:9157

The bind address of the GRPC service.

STORAGE_USERS_GRPC_PROTOCOL

string

tcp

The transport protocol of the GPRC service.

STORAGE_USERS_HTTP_ADDR

string

127.0.0.1:9158

The bind address of the HTTP service.

STORAGE_USERS_HTTP_PROTOCOL

string

tcp

The transport protocol of the HTTP service.

OCIS_CORS_ALLOW_ORIGINS
STORAGE_USERS_CORS_ALLOW_ORIGINS

[]string

[*]

A list of allowed CORS origins. See following chapter for more details: Access-Control-Allow-Origin at https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Access-Control-Allow-Origin. See the Environment Variable Types description for more details.

OCIS_CORS_ALLOW_METHODS
STORAGE_USERS_CORS_ALLOW_METHODS

[]string

[POST HEAD PATCH OPTIONS GET DELETE]

A list of allowed CORS methods. See following chapter for more details: Access-Control-Request-Method at https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Access-Control-Request-Method. See the Environment Variable Types description for more details.

OCIS_CORS_ALLOW_HEADERS
STORAGE_USERS_CORS_ALLOW_HEADERS

[]string

[Authorization Origin X-Requested-With X-Request-Id X-HTTP-Method-Override Content-Type Upload-Length Upload-Offset Tus-Resumable Upload-Metadata Upload-Defer-Length Upload-Concat Upload-Incomplete Upload-Draft-Interop-Version]

A list of allowed CORS headers. See following chapter for more details: Access-Control-Request-Headers at https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Access-Control-Request-Headers. See the Environment Variable Types description for more details.

OCIS_CORS_ALLOW_CREDENTIALS
STORAGE_USERS_CORS_ALLOW_CREDENTIALS

bool

true

Allow credentials for CORS.See following chapter for more details: Access-Control-Allow-Credentials at https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Access-Control-Allow-Credentials.

OCIS_CORS_EXPOSE_HEADERS
STORAGE_USERS_CORS_EXPOSE_HEADERS

[]string

[Upload-Offset Location Upload-Length Tus-Version Tus-Resumable Tus-Max-Size Tus-Extension Upload-Metadata Upload-Defer-Length Upload-Concat Upload-Incomplete Upload-Draft-Interop-Version]

A list of exposed CORS headers. See following chapter for more details: Access-Control-Expose-Headers at https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Access-Control-Expose-Headers. See the Environment Variable Types description for more details.

OCIS_CORS_MAX_AGE
STORAGE_USERS_CORS_MAX_AGE

uint

86400

The max cache duration of preflight headers. See following chapter for more details: Access-Control-Max-Age at https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Access-Control-Max-Age. See the Environment Variable Types description for more details.

OCIS_JWT_SECRET
STORAGE_USERS_JWT_SECRET

string

The secret to mint and validate jwt tokens.

OCIS_REVA_GATEWAY

string

com.owncloud.api.gateway

The CS3 gateway endpoint.

OCIS_GRPC_CLIENT_TLS_MODE

string

TLS mode for grpc connection to the go-micro based grpc services. Possible values are 'off', 'insecure' and 'on'. 'off': disables transport security for the clients. 'insecure' allows using transport security, but disables certificate verification (to be used with the autogenerated self-signed certificates). 'on' enables transport security, including server certificate verification.

OCIS_GRPC_CLIENT_TLS_CACERT

string

Path/File name for the root CA certificate (in PEM format) used to validate TLS server certificates of the go-micro based grpc services.

STORAGE_USERS_SKIP_USER_GROUPS_IN_TOKEN

bool

false

Disables the loading of user’s group memberships from the reva access token.

STORAGE_USERS_GRACEFUL_SHUTDOWN_TIMEOUT

int

30

The number of seconds to wait for the 'storage-users' service to shutdown cleanly before exiting with an error that gets logged. Note: This setting is only applicable when running the 'storage-users' service as a standalone service. See the text description for more details.

STORAGE_USERS_DRIVER

string

ocis

The storage driver which should be used by the service. Defaults to 'ocis', Supported values are: 'ocis', 's3ng' and 'owncloudsql'. The 'ocis' driver stores all data (blob and meta data) in an POSIX compliant volume. The 's3ng' driver stores metadata in a POSIX compliant volume and uploads blobs to the s3 bucket.

OCIS_DECOMPOSEDFS_METADATA_BACKEND
STORAGE_USERS_OCIS_METADATA_BACKEND

string

messagepack

The backend to use for storing metadata. Supported values are 'messagepack' and 'xattrs'. The setting 'messagepack' uses a dedicated file to store file metadata while 'xattrs' uses extended attributes to store file metadata. Defaults to 'messagepack'.

OCIS_DECOMPOSEDFS_PROPAGATOR
STORAGE_USERS_OCIS_PROPAGATOR

string

sync

The propagator used for decomposedfs. At the moment, only 'sync' is fully supported, 'async' is available as an experimental option.

STORAGE_USERS_ASYNC_PROPAGATOR_PROPAGATION_DELAY

Duration

0s

The delay between a change made to a tree and the propagation start on treesize and treetime. Multiple propagations are computed to a single one. See the Environment Variable Types description for more details.

STORAGE_USERS_OCIS_ROOT

string

/var/lib/ocis/storage/users

The directory where the filesystem storage will store blobs and metadata. If not defined, the root directory derives from $OCIS_BASE_DATA_PATH:/storage/users.

STORAGE_USERS_OCIS_USER_LAYOUT

string

{{.Id.OpaqueId}}

Template string for the user storage layout in the user directory.

STORAGE_USERS_PERMISSION_ENDPOINT
STORAGE_USERS_OCIS_PERMISSIONS_ENDPOINT

string

com.owncloud.api.settings

Endpoint of the permissions service. The endpoints can differ for 'ocis' and 's3ng'.

STORAGE_USERS_OCIS_PERSONAL_SPACE_ALIAS_TEMPLATE

string

{{.SpaceType}}/{{.User.Username | lower}}

Template string to construct personal space aliases.

STORAGE_USERS_OCIS_GENERAL_SPACE_ALIAS_TEMPLATE

string

{{.SpaceType}}/{{.SpaceName | replace " " "-" | lower}}

Template string to construct general space aliases.

STORAGE_USERS_OCIS_SHARE_FOLDER

string

/Shares

Name of the folder jailing all shares.

STORAGE_USERS_OCIS_MAX_ACQUIRE_LOCK_CYCLES

int

20

When trying to lock files, ocis will try this amount of times to acquire the lock before failing. After each try it will wait for an increasing amount of time. Values of 0 or below will be ignored and the default value will be used.

STORAGE_USERS_OCIS_LOCK_CYCLE_DURATION_FACTOR

int

30

When trying to lock files, ocis will multiply the cycle with this factor and use it as a millisecond timeout. Values of 0 or below will be ignored and the default value will be used.

STORAGE_USERS_OCIS_MAX_CONCURRENCY

int

5

Maximum number of concurrent go-routines. Higher values can potentially get work done faster but will also cause more load on the system. Values of 0 or below will be ignored and the default value will be used.

OCIS_ASYNC_UPLOADS

bool

true

Enable asynchronous file uploads.

OCIS_SPACES_MAX_QUOTA
STORAGE_USERS_OCIS_MAX_QUOTA

uint64

0

Set a global max quota for spaces in bytes. A value of 0 equals unlimited. If not using the global OCIS_SPACES_MAX_QUOTA, you must define the FRONTEND_MAX_QUOTA in the frontend service.

STORAGE_USERS_S3NG_METADATA_BACKEND

string

messagepack

The backend to use for storing metadata. Supported values are 'xattrs' and 'messagepack'. The setting 'xattrs' uses extended attributes to store file metadata while 'messagepack' uses a dedicated file to store file metadata. Defaults to 'xattrs'.

OCIS_DECOMPOSEDFS_PROPAGATOR
STORAGE_USERS_S3NG_PROPAGATOR

string

sync

The propagator used for decomposedfs. At the moment, only 'sync' is fully supported, 'async' is available as an experimental option.

STORAGE_USERS_ASYNC_PROPAGATOR_PROPAGATION_DELAY

Duration

0s

The delay between a change made to a tree and the propagation start on treesize and treetime. Multiple propagations are computed to a single one. See the Environment Variable Types description for more details.

STORAGE_USERS_S3NG_ROOT

string

/var/lib/ocis/storage/users

The directory where the filesystem storage will store metadata for blobs. If not defined, the root directory derives from $OCIS_BASE_DATA_PATH:/storage/users.

STORAGE_USERS_S3NG_USER_LAYOUT

string

{{.Id.OpaqueId}}

Template string for the user storage layout in the user directory.

STORAGE_USERS_PERMISSION_ENDPOINT
STORAGE_USERS_S3NG_PERMISSIONS_ENDPOINT

string

com.owncloud.api.settings

Endpoint of the permissions service. The endpoints can differ for 'ocis' and 's3ng'.

STORAGE_USERS_S3NG_REGION

string

default

Region of the S3 bucket.

STORAGE_USERS_S3NG_ACCESS_KEY

string

Access key for the S3 bucket.

STORAGE_USERS_S3NG_SECRET_KEY

string

Secret key for the S3 bucket.

STORAGE_USERS_S3NG_ENDPOINT

string

Endpoint for the S3 bucket.

STORAGE_USERS_S3NG_BUCKET

string

Name of the S3 bucket.

STORAGE_USERS_S3NG_PUT_OBJECT_DISABLE_CONTENT_SHA256

bool

false

Disable sending content sha256 when copying objects to S3.

STORAGE_USERS_S3NG_PUT_OBJECT_DISABLE_MULTIPART

bool

true

Disable multipart uploads when copying objects to S3

STORAGE_USERS_S3NG_PUT_OBJECT_SEND_CONTENT_MD5

bool

true

Send a Content-MD5 header when copying objects to S3.

STORAGE_USERS_S3NG_PUT_OBJECT_CONCURRENT_STREAM_PARTS

bool

true

Always precreate parts when copying objects to S3.

STORAGE_USERS_S3NG_PUT_OBJECT_NUM_THREADS

uint

4

Number of concurrent uploads to use when copying objects to S3.

STORAGE_USERS_S3NG_PUT_OBJECT_PART_SIZE

uint64

0

Part size for concurrent uploads to S3.

STORAGE_USERS_S3NG_PERSONAL_SPACE_ALIAS_TEMPLATE

string

{{.SpaceType}}/{{.User.Username | lower}}

Template string to construct personal space aliases.

STORAGE_USERS_S3NG_GENERAL_SPACE_ALIAS_TEMPLATE

string

{{.SpaceType}}/{{.SpaceName | replace " " "-" | lower}}

Template string to construct general space aliases.

STORAGE_USERS_S3NG_SHARE_FOLDER

string

/Shares

Name of the folder jailing all shares.

STORAGE_USERS_S3NG_MAX_ACQUIRE_LOCK_CYCLES

int

20

When trying to lock files, ocis will try this amount of times to acquire the lock before failing. After each try it will wait for an increasing amount of time. Values of 0 or below will be ignored and the default value of 20 will be used.

STORAGE_USERS_S3NG_LOCK_CYCLE_DURATION_FACTOR

int

30

When trying to lock files, ocis will multiply the cycle with this factor and use it as a millisecond timeout. Values of 0 or below will be ignored and the default value of 30 will be used.

STORAGE_USERS_S3NG_MAX_CONCURRENCY

int

5

Maximum number of concurrent go-routines. Higher values can potentially get work done faster but will also cause more load on the system. Values of 0 or below will be ignored and the default value of 100 will be used.

STORAGE_USERS_OWNCLOUDSQL_DATADIR

string

/var/lib/ocis/storage/owncloud

The directory where the filesystem storage will store SQL migration data. If not defined, the root directory derives from $OCIS_BASE_DATA_PATH:/storage/owncloud.

STORAGE_USERS_OWNCLOUDSQL_SHARE_FOLDER

string

/Shares

Name of the folder jailing all shares.

STORAGE_USERS_OWNCLOUDSQL_LAYOUT

string

{{.Username}}

Path layout to use to navigate into a users folder in an owncloud data directory

STORAGE_USERS_OWNCLOUDSQL_UPLOADINFO_DIR

string

/var/lib/ocis/storage/uploadinfo

The directory where the filesystem will store uploads temporarily. If not defined, the root directory derives from $OCIS_BASE_DATA_PATH:/storage/uploadinfo.

STORAGE_USERS_OWNCLOUDSQL_DB_USERNAME

string

owncloud

Username for the database.

STORAGE_USERS_OWNCLOUDSQL_DB_PASSWORD

string

owncloud

Password for the database.

STORAGE_USERS_OWNCLOUDSQL_DB_HOST

string

Hostname or IP of the database server.

STORAGE_USERS_OWNCLOUDSQL_DB_PORT

int

3306

Port that the database server is listening on.

STORAGE_USERS_OWNCLOUDSQL_DB_NAME

string

owncloud

Name of the database to be used.

STORAGE_USERS_OWNCLOUDSQL_USERS_PROVIDER_ENDPOINT

string

com.owncloud.api.users

Endpoint of the users provider.

STORAGE_USERS_DATA_SERVER_URL

string

http://localhost:9158/data

URL of the data server, needs to be reachable by the data gateway provided by the frontend service or the user if directly exposed.

STORAGE_USERS_DATA_GATEWAY_URL

string

https://localhost:9200/data

URL of the data gateway server

STORAGE_USERS_TRANSFER_EXPIRES

int64

86400

The time after which the token for upload postprocessing expires

OCIS_EVENTS_ENDPOINT
STORAGE_USERS_EVENTS_ENDPOINT

string

127.0.0.1:9233

The address of the event system. The event system is the message queuing service. It is used as message broker for the microservice architecture.

OCIS_EVENTS_CLUSTER
STORAGE_USERS_EVENTS_CLUSTER

string

ocis-cluster

The clusterID of the event system. The event system is the message queuing service. It is used as message broker for the microservice architecture. Mandatory when using NATS as event system.

OCIS_INSECURE
STORAGE_USERS_EVENTS_TLS_INSECURE

bool

false

Whether to verify the server TLS certificates.

OCIS_EVENTS_TLS_ROOT_CA_CERTIFICATE
STORAGE_USERS_EVENTS_TLS_ROOT_CA_CERTIFICATE

string

The root CA certificate used to validate the server’s TLS certificate. If provided STORAGE_USERS_EVENTS_TLS_INSECURE will be seen as false.

OCIS_EVENTS_ENABLE_TLS
STORAGE_USERS_EVENTS_ENABLE_TLS

bool

false

Enable TLS for the connection to the events broker. The events broker is the ocis service which receives and delivers events between the services.

STORAGE_USERS_EVENTS_NUM_CONSUMERS

int

0

The amount of concurrent event consumers to start. Event consumers are used for post-processing files. Multiple consumers increase parallelisation, but will also increase CPU and memory demands. The setting has no effect when the OCIS_ASYNC_UPLOADS is set to false. The default and minimum value is 1.

OCIS_EVENTS_AUTH_USERNAME
STORAGE_USERS_EVENTS_AUTH_USERNAME

string

The username to authenticate with the events broker. The events broker is the ocis service which receives and delivers events between the services.

OCIS_EVENTS_AUTH_PASSWORD
STORAGE_USERS_EVENTS_AUTH_PASSWORD

string

The password to authenticate with the events broker. The events broker is the ocis service which receives and delivers events between the services.

OCIS_CACHE_STORE
STORAGE_USERS_FILEMETADATA_CACHE_STORE

string

memory

The type of the cache store. Supported values are: 'memory', 'redis-sentinel', 'nats-js-kv', 'noop'. See the text description for details.

OCIS_CACHE_STORE_NODES
STORAGE_USERS_FILEMETADATA_CACHE_STORE_NODES

[]string

[127.0.0.1:9233]

A list of nodes to access the configured store. This has no effect when 'memory' or 'ocmem' stores are configured. Note that the behaviour how nodes are used is dependent on the library of the configured store. See the Environment Variable Types description for more details.

OCIS_CACHE_DATABASE

string

storage-users

The database name the configured store should use.

OCIS_CACHE_TTL
STORAGE_USERS_FILEMETADATA_CACHE_TTL

Duration

24m0s

Default time to live for user info in the user info cache. Only applied when access tokens has no expiration. See the Environment Variable Types description for more details.

OCIS_CACHE_SIZE
STORAGE_USERS_FILEMETADATA_CACHE_SIZE

int

0

The maximum quantity of items in the user info cache. Only applies when store type 'ocmem' is configured. Defaults to 512 which is derived from the ocmem package though not exclicitely set as default.

OCIS_CACHE_DISABLE_PERSISTENCE
STORAGE_USERS_FILEMETADATA_CACHE_DISABLE_PERSISTENCE

bool

false

Disables persistence of the cache. Only applies when store type 'nats-js-kv' is configured. Defaults to false.

OCIS_CACHE_AUTH_USERNAME
STORAGE_USERS_FILEMETADATA_CACHE_AUTH_USERNAME

string

The username to authenticate with the cache store. Only applies when store type 'nats-js-kv' is configured.

OCIS_CACHE_AUTH_PASSWORD
STORAGE_USERS_FILEMETADATA_CACHE_AUTH_PASSWORD

string

The password to authenticate with the cache store. Only applies when store type 'nats-js-kv' is configured.

OCIS_CACHE_STORE
STORAGE_USERS_ID_CACHE_STORE

string

memory

The type of the cache store. Supported values are: 'memory', 'redis-sentinel', 'nats-js-kv', 'noop'. See the text description for details.

OCIS_CACHE_STORE_NODES
STORAGE_USERS_ID_CACHE_STORE_NODES

[]string

[127.0.0.1:9233]

A list of nodes to access the configured store. This has no effect when 'memory' or 'ocmem' stores are configured. Note that the behaviour how nodes are used is dependent on the library of the configured store. See the Environment Variable Types description for more details.

OCIS_CACHE_DATABASE

string

ids-storage-users

The database name the configured store should use.

OCIS_CACHE_TTL
STORAGE_USERS_ID_CACHE_TTL

Duration

24m0s

Default time to live for user info in the user info cache. Only applied when access tokens have no expiration. Defaults to 300s which is derived from the underlaying package though not explicitly set as default. See the Environment Variable Types description for more details.

OCIS_CACHE_SIZE
STORAGE_USERS_ID_CACHE_SIZE

int

0

The maximum quantity of items in the user info cache. Only applies when store type 'ocmem' is configured. Defaults to 512 which is derived from the ocmem package though not exclicitely set as default.

OCIS_CACHE_DISABLE_PERSISTENCE
STORAGE_USERS_ID_CACHE_DISABLE_PERSISTENCE

bool

false

Disables persistence of the cache. Only applies when store type 'nats-js-kv' is configured. Defaults to false.

OCIS_CACHE_AUTH_USERNAME
STORAGE_USERS_ID_CACHE_AUTH_USERNAME

string

The username to authenticate with the cache store. Only applies when store type 'nats-js-kv' is configured.

OCIS_CACHE_AUTH_PASSWORD
STORAGE_USERS_ID_CACHE_AUTH_PASSWORD

string

The password to authenticate with the cache store. Only applies when store type 'nats-js-kv' is configured.

STORAGE_USERS_MOUNT_ID

string

Mount ID of this storage.

STORAGE_USERS_EXPOSE_DATA_SERVER

bool

false

Exposes the data server directly to users and bypasses the data gateway. Ensure that the data server address is reachable by users.

STORAGE_USERS_READ_ONLY

bool

false

Set this storage to be read-only.

STORAGE_USERS_UPLOAD_EXPIRATION

int64

86400

Duration in seconds after which uploads will expire. Note that when setting this to a low number, uploads could be cancelled before they are finished and return a 403 to the user.

OCIS_ADMIN_USER_ID
STORAGE_USERS_PURGE_TRASH_BIN_USER_ID

string

ID of the user who collects all necessary information for deletion. Consider that the UUID can be encoded in some LDAP deployment configurations like in .ldif files. These need to be decoded beforehand.

STORAGE_USERS_PURGE_TRASH_BIN_PERSONAL_DELETE_BEFORE

Duration

720h0m0s

Specifies the period of time in which items that have been in the personal trash-bin for longer than this value should be deleted. A value of 0 means no automatic deletion. See the Environment Variable Types description for more details.

STORAGE_USERS_PURGE_TRASH_BIN_PROJECT_DELETE_BEFORE

Duration

720h0m0s

Specifies the period of time in which items that have been in the project trash-bin for longer than this value should be deleted. A value of 0 means no automatic deletion. See the Environment Variable Types description for more details.

OCIS_SERVICE_ACCOUNT_ID
STORAGE_USERS_SERVICE_ACCOUNT_ID

string

The ID of the service account the service should use. See the 'auth-service' service description for more details.

OCIS_SERVICE_ACCOUNT_SECRET
STORAGE_USERS_SERVICE_ACCOUNT_SECRET

string

The service account secret.

OCIS_GATEWAY_GRPC_ADDR
STORAGE_USERS_GATEWAY_GRPC_ADDR

string

127.0.0.1:9142

The bind address of the gateway GRPC address.

OCIS_MACHINE_AUTH_API_KEY
STORAGE_USERS_MACHINE_AUTH_API_KEY

string

Machine auth API key used to validate internal requests necessary for the access to resources from other services.

STORAGE_USERS_CLI_MAX_ATTEMPTS_RENAME_FILE

int

0

The maximum number of attempts to rename a file when a user restores a file to an existing destination with the same name. The minimum value is 100.

YAML Example

  • 5.0.2

# Autogenerated
# Filename: storage-users-config-example.yaml

tracing:
  enabled: false
  type: ""
  endpoint: ""
  collector: ""
log:
  level: ""
  pretty: false
  color: false
  file: ""
debug:
  addr: 127.0.0.1:9159
  token: ""
  pprof: false
  zpages: false
grpc:
  addr: 127.0.0.1:9157
  tls: null
  protocol: tcp
http:
  addr: 127.0.0.1:9158
  protocol: tcp
  prefix: data
  cors:
    allow_origins:
    - '*'
    allow_methods:
    - POST
    - HEAD
    - PATCH
    - OPTIONS
    - GET
    - DELETE
    allow_headers:
    - Authorization
    - Origin
    - X-Requested-With
    - X-Request-Id
    - X-HTTP-Method-Override
    - Content-Type
    - Upload-Length
    - Upload-Offset
    - Tus-Resumable
    - Upload-Metadata
    - Upload-Defer-Length
    - Upload-Concat
    - Upload-Incomplete
    - Upload-Draft-Interop-Version
    allow_credentials: true
    expose_headers:
    - Upload-Offset
    - Location
    - Upload-Length
    - Tus-Version
    - Tus-Resumable
    - Tus-Max-Size
    - Tus-Extension
    - Upload-Metadata
    - Upload-Defer-Length
    - Upload-Concat
    - Upload-Incomplete
    - Upload-Draft-Interop-Version
    max_age: 86400
token_manager:
  jwt_secret: ""
reva:
  address: com.owncloud.api.gateway
  tls:
    mode: ""
    cacert: ""
skip_user_groups_in_token: false
graceful_shutdown_timeout: 30
driver: ocis
drivers:
  ocis:
    metadata_backend: messagepack
    propagator: sync
    async_propagator_options:
      propagation_delay: 0s
    root: /var/lib/ocis/storage/users
    user_layout: '{{.Id.OpaqueId}}'
    permissions_endpoint: com.owncloud.api.settings
    personalspacealias_template: '{{.SpaceType}}/{{.User.Username | lower}}'
    generalspacealias_template: '{{.SpaceType}}/{{.SpaceName | replace " " "-" | lower}}'
    share_folder: /Shares
    max_acquire_lock_cycles: 20
    lock_cycle_duration_factor: 30
    max_concurrency: 5
    async_uploads: true
    max_quota: 0
  s3ng:
    metadata_backend: messagepack
    propagator: sync
    async_propagator_options:
      propagation_delay: 0s
    root: /var/lib/ocis/storage/users
    user_layout: '{{.Id.OpaqueId}}'
    permissions_endpoint: com.owncloud.api.settings
    region: default
    access_key: ""
    secret_key: ""
    endpoint: ""
    bucket: ""
    put_object_disable_content_sha254: false
    put_object_disable_multipart: true
    put_object_send_content_md5: true
    put_object_concurrent_stream_parts: true
    put_object_num_threads: 4
    put_object_part_size: 0
    personalspacealias_template: '{{.SpaceType}}/{{.User.Username | lower}}'
    generalspacealias_template: '{{.SpaceType}}/{{.SpaceName | replace " " "-" | lower}}'
    share_folder: /Shares
    max_acquire_lock_cycles: 20
    lock_cycle_duration_factor: 30
    max_concurrency: 5
  owncloudsql:
    root: /var/lib/ocis/storage/owncloud
    share_folder: /Shares
    user_layout: '{{.Username}}'
    upload_info_dir: /var/lib/ocis/storage/uploadinfo
    db_username: owncloud
    db_password: owncloud
    db_host: ""
    db_port: 3306
    db_name: owncloud
    users_provider_endpoint: com.owncloud.api.users
data_server_url: http://localhost:9158/data
data_gateway_url: https://localhost:9200/data
transfer_expires: 86400
events:
  endpoint: 127.0.0.1:9233
  cluster: ocis-cluster
  tls_insecure: false
  tls_root_ca_cert_path: ""
  enable_tls: false
  num_consumers: 0
  username: ""
  password: ""
filemetadata_cache:
  store: memory
  nodes:
  - 127.0.0.1:9233
  database: storage-users
  ttl: 24m0s
  size: 0
  disable_persistence: false
  username: ""
  password: ""
id_cache:
  store: memory
  nodes:
  - 127.0.0.1:9233
  database: ids-storage-users
  ttl: 24m0s
  size: 0
  disable_persistence: false
  username: ""
  password: ""
mount_id: ""
expose_data_server: false
readonly: false
upload_expiration: 86400
tasks:
  purge_trash_bin:
    user_id: ""
    personal_delete_before: 720h0m0s
    project_delete_before: 720h0m0s
service_account:
  service_account_id: ""
  service_account_secret: ""
gateway_addr: 127.0.0.1:9142
machine_auth_api_key: ""
max_attempts_rename_file: 0