Dear ownCloud administrator, find below the changes and known issues in ownCloud Server 10.13.1 that need your attention. You can also read the full ownCloud Server changelog for further details on what has changed.
The "Open in Web" feature for direct editing of office documents now properly works on iOS and Desktop clients with Collabora. #40958
The "Open in Web" configuration offers icons to be shown in the clients. This is e.g. used by the iOS 12.0.3 client. We now ship the icons embedded in core. #40953
Find below a list of updated apps in comparison with the 10.13.0 complete bundle. More information on the changes can be found in the respective changelogs on ownCloud Marketplace.
Two cron jobs related to cleaning up left over thumbnails were not properly enabled in the past (
PreviewCleanupJob). In 10.13.0 the code was fixed, and the jobs started running. However, in certain cases with an exceptionally high number of potential cleanups, these jobs can now take up a substantial amount of database resources. We propose to temporarily disable the offending job until we have a fix.
Dear ownCloud administrator, find below the changes and known issues in ownCloud Server 10.13.0 that need your attention. You can also read the full ownCloud Server changelog for further details on what has changed.
Internet Explorer 11 support will be dropped in the next server release.
Symfony framework has been updated to LTS major version 5.4. This also affected a number of apps which required a new release and have been now included in the complete bundle.
User key encryption has been already deprecated in core versions later than 10.7. For this reason, the command line interface and web UI to enable user key encryption is no longer available. If you are operating an ownCloud installation with user key encryption enabled, please get in contact with email@example.com to plan a migration to master key encryption. encryption#389
encryption:encrypt-all occ command will no longer auto-enable user key encryption. #40702
Metadata coming from storages are stored in the database. Previously, when a storage has been removed from ownCloud, metadata remained in the DB. The new occ command allows removing that stored metadata, reducing the amount of space used by the DB as well as slightly improving the performance since there will be less entries. #40779
2-factor authentication can be enforced now. The feature requires at least one app implementing 2-factor authentication, otherwise no enforcement will be done. If 2-factor authentication is enforced, all users will be required to use a 2-factor authentication app. Some specific groups selected by the admin can be excluded to let those users bypass 2-factor authentication. #40830
After an update of the guzzle library in previous core versions, it was no longer possible to set up new trusted server relations for federated sharing over the Web UI because of the wrong format used during the token exchange phase. We now explicitly set the format to be json so that the exchange is correctly done. #40815
New occ commands have been added to handle the trusted servers for federation from the command line. These commands will allow the admin to add, list and remove trusted servers. #40796
By using a new option
Open in.. in the iOS (version 12.0.3+) or Desktop client (version 4.0+) it is now possible to directly open a file in the Office Suite being installed on the ownCloud server. #40843
share_folder config.php option was set, guest users could not longer see their received shares. We now skip the
share_folder config.php option for guest users and default to root. #40864
Remote shares will have the same restrictions as user and group shares. This means that, in order for a remote user to show up as sharee, the search term length must be greater than the minimum configured otherwise only exact matches will be shown. #40885
Storage and database are now cleaned up of any remaining items if a file upload fails. #40892
The files app version was not properly increased when the
OCA\Files\BackgroundJob\PreviewCleanupJob background jobs were originally added. As a result, those two jobs were not correctly inserted into the
oc_jobs table upon a core upgrade. First time installations are not affected as their jobs are correctly added. #40878
Uploading files to some external storages via the desktop client was causing issues due to the checksum wrapper. We are using additional wrappers and the mode wasn’t being detected correctly in some cases. Using the right mode in the checksum wrapper was required in order to decide whether we should have discarded the final checksum or not; in this case, the checksum was being discarded so it was causing a checksum mismatch. Now the open mode in the checksum wrapper is set explicitly. #40832
Core 10.12.1 brought an update of the google/apiclient from version 2.12.6 to 2.13.1. However, in version 2.13.0 the accounts.google.com authorization URI has been updated. This change broke old code that uses the
setApprovalPrompt('force') instead of the newer
setPrompt('consent') method, as this endpoint does not support the legacy approval prompt parameter. This has been now fixed. #40783
Fixed query that detects unused thumbnails to prevent unnecessary deletes and potential recreations. #40801
Online updater is not recommended for Enterprise installations and is now automatically disabled in such cases. #40841
The versions expire job does not report errors anymore with federated shares when versioning metadata is enabled. #40847
Background jobs can be no longer valid because they are from an old version of an app, or from an app that has been disabled. These jobs can now be listed with the command
occ background:queue:status --display-invalid-jobs and can be deleted with the command
occ background:queue:delete <Job ID>. #40846
Previously, the user list was sorted in the browser. This was causing confusion because the sorting happened without taking into account all the items, so there were some weird effects. There is no sorting in the browser now. The server is expected to return the list of users already sorted, so the browser just needs to show the list. #40840
add group button has been removed from the dropdowns because the behavior was confusing. You can still create new groups in the users page by using the
add group button in the top left corner of the users page. The dropdowns will only select existing groups, but they won’t add new groups. #40770
firebase/php-jwt version 6 is now part of core and all apps can rely on it. #40901
To ensure clean and reliable operation of the ownCloud platform it is important to stay up-to-date with the latest releases of the server as well as the clients. To take care of compatibility between the server and desktop clients, the minimum version the server will accept connections from has been raised to version
While it’s recommended to keep up with later versions, this is the new default value. #40876
Setup checks now allow values other than
nonefor X-Robots-Tag header. If
nofolloware missing, a security warning is raised. Previously a header value with
nofollowwasn’t allowed even though it was valid. #40715
Last Logincolumn on the Users page is now correctly hidden if the setting is initially unchecked. #40771
User input is validated now in UserController. #40769
A system tag with a too long name resulted in potentially inaccessible data. #40804
A federated share with a too long name resulted in inaccessible data. #40726
Due to Apache rewrite rules originally not existing headers could hold an empty string. #40856
Verbose command output of
background:queue:executeis now displayed. #40844
There have been rare cases where deleting a file from a Google Drive mount could have thrown an undefined variable error. Since the process completed without further issues, no errors should have been thrown. This fix initializes the variables for these cases properly, making the error go away. #40822
Some occ commands could have returned an invalid exit status when executed. This has been corrected and occ commands will now always return an integer exit status. Zero (0) is success, any other value indicates a problem. #40793
Do not correct parent folders if the target isn’t fully scanned. #40730
Trying to connect an external WebDAV storage to a non-WebDAV server will now fail when trying to initiate the first connection. This prevents connecting to an invalid server, and thus prevents problems for users. #40861
We have added an
if-statementin the ShareesController code of the files_sharing app that searches for remote sharees. When the
sciencemeshapp is installed, it will be used instead of the federatedfilesharing app to find sharee matches for OCM sharing. #40886
Changed the share dropdown to expand to the page bottom if there are more entries. #40873
Find below a list of updated apps in comparison with the 10.12.2 complete bundle. More information on the changes can be found in the respective changelogs on ownCloud Marketplace.
https://marketplace.owncloud.com/apps/activity [Activity] 2.7.2
https://marketplace.owncloud.com/apps/admin_audit [Auditing] 2.1.4
https://github.com/owncloud/configreport/releases [ConfigReport] 0.2.2
https://marketplace.owncloud.com/apps/customgroups [Custom Groups] 0.7.2
https://marketplace.owncloud.com/apps/diagnostics [Diagnostics] 0.2.0
https://marketplace.owncloud.com/apps/drawio [Drawio] 1.0.1
https://github.com/owncloud/encryption/releases [Default encryption module] 1.6.1
https://marketplace.owncloud.com/apps/files_antivirus [Anti-Virus] 1.2.2
https://marketplace.owncloud.com/apps/files_classifier [Document Classification] 1.4.0
https://marketplace.owncloud.com/apps/files_lifecycle [File Lifecycle Management] 1.3.4
https://marketplace.owncloud.com/apps/files_primary_s3 [S3 Primary Object Storage] 1.5.0
https://marketplace.owncloud.com/apps/files_texteditor [Text Editor] 2.6.0
https://github.com/owncloud/firstrunwizard/releases [First run wizard] 1.3.0
https://marketplace.owncloud.com/apps/impersonate [Impersonate] 0.5.3
https://marketplace.owncloud.com/apps/kerberos [Kerberos Integration] 1.0.0
https://marketplace.owncloud.com/apps/market [Market] 0.8.0
https://marketplace.owncloud.com/apps/metrics [Metrics] 1.4.0
https://github.com/owncloud/notifications/releases [Notifications] 0.6.0
https://marketplace.owncloud.com/apps/oauth2 [OAuth2] 0.6.0
https://marketplace.owncloud.com/apps/password_policy [Password Policy] 2.2.0
https://marketplace.owncloud.com/apps/ransomware_protection [Ransomware Protection] 1.7.0
https://github.com/owncloud/updater/releases [Updater] 1.1.0
https://marketplace.owncloud.com/apps/user_ldap [LDAP Integration] 0.18.0
https://marketplace.owncloud.com/apps/user_shibboleth [SAML/SSO Integration] 3.6.0
https://marketplace.owncloud.com/apps/web [Web] 7.0.3
https://marketplace.owncloud.com/apps/windows_network_drive [External Storage: Windows Network Drives] 2.3.1
https://marketplace.owncloud.com/apps/wopi [Microsoft Office Online] 1.7.0
https://marketplace.owncloud.com/apps/workflow [Workflows] 0.6.0
Dear ownCloud administrator, find below the changes and known issues in ownCloud Server 10.12.2 that need your attention. You can also read the full ownCloud Server changelog for further details on what has changed.
Do not allow setting higher permissions on a federated share for a resource which was shared with limited permissions. #40803
loginInOwnCloud method contains sensitive data in the argument list and needed therefore to be added to the list of methods where sensitive parameters are being obfuscated. #40792
Dear ownCloud administrator, find below the changes and known issues in ownCloud Server 10.12.1 that need your attention. You can also read the full ownCloud Server changelog for further details on what has changed.
Passwords on public link files with read + write permission were not correctly enforced. The usage of the permissions bits has been now fixed so that, when selecting "Enforce password protection for read + write + delete links", passwords are correctly enforced. #40701
With the introduction of https://github.com/owncloud/core/pull/40567 compatibility with 32-bit systems broke as we are now casting $freeSpace to int and this caused an integer overflow on such systems when the free space was above the max supported value. We added therefore an additional check for 32-bit systems in QuotaPlugin.php. #40709
Quota calculation on 32 bit systems suffered from an inconsistent use of float and integer data types. The fix now correctly supports that the size could be either an integer or a float. #40729
Since version 2.5.0 of the files_texteditor app we use Firebase\JWT\JWT, but this dependency was not directly shipped with files_texteditor. This was not an issue if the files_external or WOPI app(s) were enabled as they include the same dependency. However, if both apps were disabled the functionality of the files_texteditor app broke. We now ship this dependency in files_texteditor as well. files_texteditor#389
Referencing Known Issues of 10.12.0.
In previous core versions, the setting of the
htaccess.RewriteBase config.php option was not added to the generated .htaccess file. The use of a more hardened .htaccess file in version 10.12.0, introduced by #40584, caused the files view in the web UI to be empty in setups described in the referenced known issue. Additionally, the desktop app was not be able to sync and an error 405 (Method not allowed) was returned. The
htaccess.RewriteBase is now correctly added to the .htaccess file, see the fix at #40697.
When using the User Home Folder Naming Rule (configurable in the Advanced tab of the LDAP wizard), which allows to specify the home folder by means of an LDAP attribute, chunks of users' uploads were wrongly created under the default data directory rather than inside the configured home directory. We are now using the getHome() method for getting the user’s home so that chunks uploads respect the configured home directory. https://github.com/owncloud/core/pull/40693 [#40693] #40719
Find below a list of updated apps in comparison with the 10.12.0 complete bundle. More information on the changes can be found in the respective changelogs on ownCloud Marketplace.
Core 10.12.1 brought an update of the google/apiclient from version 2.12.6 to 2.13.1. However, in version 2.13.0 the accounts.google.com authorization URI has been updated. This change breaks old code that uses the
setApprovalPrompt('force') instead of the newer
setPrompt('consent') method, as this endpoint does not support the legacy approval prompt parameter. As a result, Google Drive external storage integration is currently broken. This will be fixed in core version 10.13.0, please refer to https://github.com/owncloud/core/pull/40783 for more details.
Dear ownCloud administrator, find below the changes and known issues in ownCloud Server 10.12 that need your attention. You can also read the full ownCloud Server changelog for further details on what has changed.
When upgrading from ownCloud Server 10.11.0, the following migrations will run as part of the upgrade procedure:
A migration step takes care of setting the length of the "oc_calendars.components" column to 255 (see below). This step is expected to be quick and should not impact upgrade duration significantly. #40563
An index is going to be added on the oc_filecache table which should speed up bulk file operations. Consider that this migration step may take several hours in case of installations where the oc_filecache table contains a significantly large number of entries. #40633
Support for security fixes for PHP 7.3 ended in December 2021. ownCloud Server no longer supports PHP 7.3 therefore ensure that you are using PHP 7.4. #40394
|Before upgrading to ownCloud Server 10.12, you MUST upgrade to PHP 7.4. ownCloud Server 10.12 will not start when using PHP 7.3.|
To save space, old versions of files are usually deleted over time according to ownCloud’s retention policy. Users are now able to mark the current version as "published". This increases the major version tag and prevents deletion. Also, restore operation logic changed. Now restore creates a new current version of the file from one of the past noncurrent versions of the file. The current version also receives incremented mtime for the file, and author of the file is the user who restored it. The old noncurrent version is no longer removed upon restore and the current version no longer receives mtime of that version. The current version of the file is now shown in the Versions Tab, highlighted with "gray" background. Versions now persist additional extended metadata on versioning tags, that allow easier identification of the versions. Each update increases the minor version for the file. Each new edit of the file creates noncurrent versions - the ones tagged with major version due to publishing will persist long term and won’t be subject to any retention policies. Migrate from deprecated save_version_author to save_version_metadata. #40531
Support for login policies has been added in order to block the login of users under some circumstances. By default, there isn’t any restriction, so any user can login normally (assuming the password is correct). A group login policy has been added. This policy allows or denies users to log in based on the login type being used (username + password, openID Connect, etc.) and whether they belong to specific groups. This can be used to ensure a group of users is always authenticated using a determined authentication mechanism. #40574
Previously, restoring or removing a file from a deleted folder (the folder and the contents were in the trashbin) didn’t remove the versions of the file. Those versions were left in both the database and the file system, taking up space and degrading the performance. This is now being handled properly, so no resources are consumed due to the versions being left stranded. #40291
The "available for" selection of the mount configuration of external storages was using the group ID. This wasn’t a problem because for local groups the group ID matches the group display name, and for ldap groups the group ID was the "cn" attribute. Due to recent changes, the ldap group will now use the "objectuid" attribute (or a similar attribute) as group ID by default. This was causing the "available for" selection to show that "objectuid", so identifying the right group was problematic. Now, the "available for" selection will show the group display name, which for ldap is the "cn" attribute by default. Note that this happens on new installations. There is an automatic migration in place, so for upgrades, the "cn" attribute will be set as group name in order to keep the old behavior. #40412
Updates to permissions of a share were wrongly propagated to public links' children. This has now been fixed and public links are being skipped. #40420
Previously, range downloads (or downloads requesting a specific byte range) would store a checksum, if needed, based only on the requested range. This caused problems because the checksum is expected to be for the whole file. Now those range downloads won’t store a checksum because only a part of the file has been read, so the checksum would be incomplete. Some additional cases have been taken into account, mostly based on actions that could happen on the data stream, but they shouldn’t happen normally. #40513
ownCloud’s file system was initialized partially to prevent contacting the LDAP server if it was configured. This was causing problems because the upload folder where the chunks were expected was a mount point, and due to the partial file system initialization such a mount point was missing, so we were checking a different folder (the default one). Now, ownCloud’s file system will be fully initialized instead, so that the mount point will be present and we check the right location. #40571
With encryption enabled when a file was renamed, first the actual file was renamed, and then the encryption keys were moved to the new location. If something went wrong, it was possible that the keys weren’t moved. This caused the file to become inaccessible because we couldn’t decrypt the file due to the missing keys (which weren’t in the right place). Now, when a file is renamed, the encryption keys will be copied first, and then the file will be renamed. If copying the encryption keys fails, renaming will fail. After the encryption keys are copied, the file could still fail to be renamed. In this case, the copies of the keys will be removed, but the file will still be accessible because we still keep the old keys. The original keys (not the copy) will be removed if the file is successfully renamed. #40433
In the files apps, the "shared with others" and "shared by link" sections allowed people to use a delete action on a file or folder present in that list. This was causing problems because people accidentally removed the folder when, in fact, they wanted to unshare it. This delete action isn’t present any longer. You can revoke shares by accessing the file or folder’s details. If you want to delete the file or folder, you can do it from the regular "all files" section. #40497
This change is targeted mostly at tightly federated setups. Currently, if a federated share is invalid or the API endpoint returns "not found", an availability check would validate whether this is a problem with a server, and that given share is removed. However, in some cases these checks might not be enough (e.g. complex migrations in tightly federated setups). In that case the invalidation behavior can be disabled by using the app setting: "occ config:app:set files_sharing enable_cleanup_invalid_external_shares --value no". #40503
Some images with large EXIF data had problems with the orientation when they were shown. This was caused by the native function failing to retrieve the EXIF data. Images with small EXIF data didn’t have this problem. By making the chunk size of the stream bigger, the native function is now able to load the EXIF data properly and return the information, and with such information we can fix the orientation of the image. #40600
Empty directories were left when the contained versions were deleted or moved. Large installations might end up with too many of these empty directories. Now, when a version is deleted, the containing directory will also be deleted if there aren’t any more versions inside. #40499
When an app_path is pointing outside of the ownCloud server root or uses an symlink, under certain conditions the l10n folder points to an invalid location and results in a crash of the server. This happened due to the assumption that app paths always start with the server root path. #40607
Public links were lost upon moving a share into another share as the share owner was not correctly set. This has now been partially fixed. #40612
Until now it was possible for users with 0 quota or who already reached the limit of their assigned quota to still create empty files/folders, which was confusing. This behavior has been fixed. #40567
Previously only files were accepted via drag & drop. Users can now also drag folders into a public link that has the filedrop flag. When adding a folder, the hierarchy is flattened out and all files are added without any subfolders. Name collisons are avoided as usual. #40643
We have added an if-statement in the files_sharing ShareesController code that searches for remote sharees. When the config entry "sharing.remoteShareesSearch" is set to the name of a class that is registered in the server container and that implements "IRemoteShareesSearch" (for instance the "ScienceMeshSearchPlugin" that the "sciencemesh" app registers) it will be used instead of the federatedfilesharing app to find sharee matches for OCM sharing. #40577
Object storages are reporting only unknown storage space. This causes problems for other apps that rely on this storage method, e.g. metrics app that monitors the available space. A new configuration at the storage level has been added which allows apps or further extensions of the storage class for object storage to use it. #40674
The suggested host name and port syntax for the database host on the installation has been corrected. #40348
Without this change, server-side Apache Auth (e.g. Shibboleth) resulted in a redirect to the default ownCloud page instead of the last visited page. We now correctly handle redirect_url. #40470 #40161
We now expect a not found error instead of a permission denied error for some trash interactions. #40406
Mime types of hidden files are now properly detected. #40427
Unused Google SDK services are removed to reduce package size. #40444
Added account creation time in the oc_accounts table so that this info can be displayed over the Users page. Also extended the users provisioning API and the "user:list" occ command to display this info. #40588
For easy access of files through WebDAV the URL is now displayed right under the app password section. #40509
The username as well as the full name of a user is now shown on his personal general settings page. #40510
The RewriteCond rules in the .htaccess file have been changed to match the expected paths. #40584
Two factor authentication can now be enabled using the provisioning API. #40617
Detecting unused thumbnails is now using a better optimized SQL statement which consumes less database and web server resources. #40514
Backend class aliases have been added to improve usability of the occ user:sync command. #40640
In Guzzle major version 7, the body option of a request must be a string or similar. Requests that send arrays of items have been adjusted to use the form_params option. Developers of apps that use lib/private/Http/Client/IClient.php should check any calls to ensure that arrays of items are not passed in the body option. See the diffs of PHP docs in the linked PR for examples. #40652
In some cases mail notifications related to sharing activities are blocked by mail filters as they are flagged as email impersonation. In such cases it may be desirable for an ownCloud admin to have a config option for removing the sender display name from the "From" address. This is now possible by setting the config.php parameter "remove_sender_display_name ⇒ true". #40671
Find below a list of updated apps in comparison with the 10.11.0 complete bundle. More information on the changes can be found in the respective changelogs on ownCloud Marketplace.
If you have installed ownCloud 10.12.0 in the combination of:
URL via subfolder
the files view in the web UI will be empty. The desktop app will not be able to sync and an error 405 (Method not allowed) will be thrown. The problem is fixed in 10.12.1. Note that owncloud Server 10.11.0 and earlier are not affected.
Dear ownCloud administrator, find below the changes and known issues in ownCloud Server 10.11 that need your attention. You can also read the full ownCloud Server changelog for further details on what has changed.
When upgrading from ownCloud Server 10.10, there will be no migration steps impacting the upgrade duration. Therefore the upgrade is expected to finish quickly.
In previous versions of ownCloud Server, public links on single files could only be created with read-only permissions (
Download / View). If users wanted to share a file and enable recipients to change it, they had to put that file into a folder and share that with permissions for editing (
Download / View / Edit). Server 10.11 introduces the
Download / View / Edit role for public link shares on single files to make a user’s life easier. Especially when using ownCloud in combination with web office solutions like ONLYOFFICE, Collabora Online or Microsoft Office Online, users can now quickly and conveniently collaborate on documents with external parties. #40264
Server 10.11 introduces the ability to share with multiple users at once by entering their identifiers (e.g., display name, user ID, email address, federated cloud ID) as a comma-separated list in the sharing dialog (e.g.,
alice,firstname.lastname@example.org,carol. Based on the inputs, ownCloud will decide how to create the shares (e.g., share with an internal user, invite a new guest, create a federated share). This way, users can easily invite many recipients at once to their files and folders. With Custom Groups version 0.7.0 onwards the same behavior also applies to adding users to Custom Groups. #40155 customgroups#522 guests#506
Server 10.11 in combination with Custom Groups 0.7.0 and Guests 0.12.0 allows inviting new guest users directly into a Custom Group. Previously this was only possible by sharing files with new guests first and creating their user account thereby. New guests will not have access to any files nor will they be able to create/upload their own files unless there is a share with the respective Custom Group or with the guest user. #521 guests#506
For new user accounts, the default skeleton files have been changed a bit in version 10.11. The ownCloud user manual PDF has been removed as it becomes outdated quickly and will not be updated for existing users when a server upgrade is done. It is recommended to provide the official user documentation to users instead. New users will further find a folder called "Learn more about ownCloud" that contains information about the product.
The default app on login can now be set per individual user. ownCloud use this to remember which UI (Classic UI or ownCloud Web) the user has used during their last session. This way, users are always redirected to their preferred UI after logging in. #39600
ownCloud Web will now respect the user’s language setting. #40087
occ background:queue:statuswill now output more information about background jobs. #40113
Quota handling has been improved (e.g., when copying or uploading files into shared folders). #39895
The context menu for multiple file actions in public links (e.g., "Open with PDF Viewer") works again. #40143
Storage encryption has received stability improvements. #40240
Guest users will no longer see settings sections which they are not allowed to use. #40257
The process for the first login of a new user is now more stable. #40091
App passwords now continue to work even when an LDAP connection is temporarily not available. #40152
App passwords now work with case-insensitive user names. #40281
The SAML/SSO login flow is now more stable, making features like the Microsoft Office Online / WOPI integration work better in combination with SAML. #40161
The comments feature now works better on small screens. #40142
A new setting
proxy_ignorehas been introduced to exclude requests to certain domains from using the configured
Find below a list of updated apps in comparison with the 10.10.0 complete bundle. More information on the changes can be found in the respective changelogs on ownCloud Marketplace.
This release uses guzzle 7. The complete bundle contains several app updates that were migrated from guzzle 5 to guzzle 7. When using the minimum bundle, those apps can be downloaded from the marketplacte. Please check any non-standard apps for guzzle 7 compatibility. If in doubt, disable these apps before upgrading.
Currently known incompatible apps include: * richdocuments 2.7.0 * onlyoffice 7.5.3
The Guests App Whitelist feature evaluates the app whitelist stricter starting with release 0.12.0. To overcome any issues related to this strict handling, an upgrade to Guests 0.12.1 is highly recommended as this release has a much wider range of apps whitelisted by default.
Dear ownCloud administrator, find below the changes and known issues in ownCloud Server 10.10 that need your attention. You can also read the full ownCloud Server changelog for further details on what has changed.
When upgrading from ownCloud Server 10.9, the following migrations will run as part of the upgrade procedure:
A migration step takes care of converting external storage parameters to the new format (see below). This step is expected to be quick and should not impact upgrade duration significantly. #39935
ownCloud Server 10.10 comes with a couple of stability and security improvements around session lifetime and expiration in the Classic web interface #39916:
The configured session lifetime (
config.php) will now be reset each time a page is loaded or when a "heartbeat" request is sent.
If the session keepalive config option (
config.php) is set to
true, a periodic "heartbeat" request will be made automatically regardless of any activity going on. This will reset the session lifetime preventing its expiration.
If the session_keepalive config option (
config.php) is set to
false, a "heartbeat" request will be sent based on activity in order to extend the session lifetime. If there’s no activity, the session might expire, and the user will need to login again.
A new config option
session_forced_logout_timeouthas been introduced in
config.php. For advanced security, this option can be used to expire user sessions a configurable amount of seconds after they close the ownCloud browser tab or the whole browser, respectively, forcing the user to log in again when they access ownCloud the next time. This option is disabled by default.
The feature Resend invitation mail in user management does not apply to guest users anymore as those have a different invitation flow than regular users (user-based vs. admin-based). #40032
Group administrators will now only see the groups they are an administrator of in user management (previously they also saw other groups but were unable to manage them). #39752
ownCloud Server 10.9 introduced a new feature to improve initial sync and discovery performance which has been enabled by default. As there have been performance issues in certain environments, 10.10 disables the feature by default. It is recommended to enable the feature based on evaluations with test systems. #40016
Storage encryption: Restoring a received shared file now also restores its versions correctly. #39822
Storage encryption: Moving a file out of a share now also takes care of versions correctly (previously they were corrupted under certain circumstances). #39829
The mail server configuration user interface has been improved to avoid unnecessary credential exposure #39833
The 'External Storage' feature (
files_external) can now be disabled. #39856
The File Drop view for Upload-only public links has been visually improved to provide a better user experience. #39900
ownCloud Web: Guest users will now be explicitly listed as "Guests" (instead of "User") #40013
The config report now provides a dedicated guest user count
Find below a list of updated apps in comparison with the 10.9.1 complete bundle. More information on the changes can be found in the respective changelogs on ownCloud Marketplace.
ownCloud Server 10.9.1 is a follow-up bugfix release release that takes care of 10.9 known issues. You can read the full ownCloud Server changelog for further details on what has changed.
All known issues in Server 10.9.0 have been fixed:
Dear ownCloud administrator, find below the changes and known issues in ownCloud Server 10.9 that need your attention. You can also read the full ownCloud Server changelog for further details on what has changed.
To improve the performance of address book search queries (e.g., when looking for federated users to share with), a migration step adds an index in the
cards_propertiestable. The impact on upgrade duration depends on the number of known federated users. #39017
A migration step takes care of setting the new option
allow_user_to_change_mail_addressaccording to what has been set in
allow_user_to_change_display_nameto make sure that there’s no unintentional behavior change after upgrading. The impact on upgrade duration is insignificant. #39288
As announced in the previous minor releases of ownCloud Server, from version 10.9 onward ownCloud Server no longer supports PHP 7.2. If you’re running on PHP 7.2 or below, it is necessary to upgrade PHP prior to conducting the upgrade to Server 10.9. See the system requirements for more information.
|If you’re using the official Docker containers or the Univention appliance, this has been taken care of already.|
PHP 7.3 support will be dropped in one of the next server releases. Support is still available with 10.9 but it will be necessary to plan an upgrade soon if PHP < 7.4 is in use.
Server 10.9 comes with the means to drastically reduce the time needed by the ownCloud clients for the initial discovery of the contents in user accounts, especially for those with many files and huge directory structures. Practically, this means when a user account is initially set up, e.g., in the ownCloud Desktop Client or when larger directory structures are added to an existing account (e.g., via sharing or external storage mounts like Windows Network Drives), the client no longer needs to check every individual folder. Instead, the server will compose a full content listing and provide it to the client ("Streaming PROPFIND with depth=infinity", #38583). Additionally, to prevent memory issues on the server side, this content listing will be streamed to the client while it is being created.
This new server-side capability needs changes in the ownCloud clients to work. At the time of the ownCloud Server 10.9 release, client implementations for iOS, Android and Desktop are in the making but not yet available. The implementations will follow soon with the next client releases.
|If you use the currently existing versions of the ownCloud clients, you will not yet experience performance gains.|
Since version 10.5, ownCloud supports Manual File Locking to prevent concurrent changes of files by different users. The feature works in a way that it only allows the user who locked a file to unlock it again (exclusive file locking) and it provides a configurable timeout for file locks.
Version 10.9 introduces a new subfeature that allows administrators to define groups of users that are entitled to unlock locked files, independent of whether they have set the lock initially or not (#38222). Users in such groups can regain control over files, e.g., if a lock owner is unavailable and a long timeout for file locks is used. Administrators can configure this in the Manual File Locking section of the General admin settings. More information, refer to the ownCloud documentation.
To improve usability, Server 10.9 provides a new feature for file versioning. When working on documents with multiple people, it can be important to know who created a certain version, e.g., to roll back to a specific state or to understand who made which changes to a file. For this, you can enable storing and displaying the author of file versions. When enabled, users will see the author of file versions in the 'Versions' tab of the right sidebar in the web interface. To avoid time-consuming database migrations, the author metadata will be stored in files on the storage.
The feature is disabled by default as it is not compatible with all use cases. To enable it, administrators can set
'file_storage.save_version_author' ⇒ true in
|This feature is incompatible with S3 object storage. Do not enable it if you’re using S3 as primary storage.|
In certain scenarios it is not desired that all users of an ownCloud installation can create public links and share data publicly. Therefore, ownCloud Server 10.9 provides a new configuration option for administrators that allows restricting the creation of public links to users in certain groups (#38980).
|Existing public links will continue to work after introducing a restriction policy. The policy only applies to the creation of new public links.|
In some cases it is necessary to manage storage locations of users, e.g., if you want to distribute them across multiple storages. To facilitate this process, Server 10.9 introduces a new occ command (
occ user:move-home) that allows moving user home folders to a new location (#39136). The command takes care of moving the physical data and of updating all other related information. In addition, new commands like the
occ user:home:list-dirs which lists the available storage locations of users and
occ user:home:list-users which lists users belonging to a storage location have been added.
For more information, refer to the ownCloud documentation about occ and about user management.
Find below a list of updated apps in comparison with the 10.8 complete bundle. More information on the changes can be found in the respective changelogs on ownCloud Marketplace.
The handling of inaccessible federated shares has been improved to avoid removing temporarily unavailable shares. #38474
Group admins can now add users who are in at least one of their administered groups to their other groups via the HTTP Provisioning API (previously this was only possible via the web-based user management). #39013
Issues with updating apps via the Market app occurring under certain circumstances have been resolved. #39108
The logo on the login screen will be displayed correctly again, independent of its size. #39129
Image orientation information from EXIF data will now be processed correctly so that images will be displayed with the correct orientation, e.g., in the Media Viewer. #39140
occ user:reportcommand has been fixed so that only real user folders will be counted (instead of counting system folders like, e.g., avatars). Additionally, folders outside of the data directory will also be taken into account (e.g., symlinks). #39223 #39254
The "Home" icon in the breadcrumb of the Files app has been replaced with the icon and text of the respective view (e.g., All Files, Deleted Files) so that its functionality is clearer to the user. #39367
occ user:listcommand now supports the option
show-all-attributesto provide a user list including all available information at once. #39366
The "Open with" menu which is shown when a user can choose between multiple applications/actions for a certain file type (e.g., ONLYOFFICE, Collabora Online, PDF Viewer) has been improved to only show relevant actions. If there’s only one relevant action available, clicking on the file name will directly conduct this action. #39358
Support for Collabora Online Draw has been added. #39594
Thumbnails for WEBP files can now be generated. #39358
Starting and trailing spaces in file names will now be trimmed when uploading, creating and renaming files in order to maintain cross-platform compatibility (e.g., Windows does not support such file names). #39310
Empty folders can now be uploaded via the web interface. #39285
The Shared by link view has been improved for mobile devices. #39232
The Deleted files view has been improved for mobile devices. #39236
The file creation menu ("+" menu) now provides buttons to confirm and cancel file creation. #39056
The group listing of the user management in the web interface has been improved with regard to usability. #39262
It is now possible to disable the upload time estimation in the web interface using
occ config:app:set files hide_upload_estimation --value="yes". #39228
When 'upgrade.disable-web' is set to
truein config.php, the web updater section in admin settings will now be completely hidden. #39183
Deleting a tag now requires confirmation to prevent mistakes. #39157
The performance of address book search queries has been improved. #39017
File actions in the web interface will now only be triggered when clicking on the file name. A bug has been fixed that caused clicking on the file row to have the same behavior. #39361
allow_user_to_change_mail_addresshas been introduced and decoupled from the setting
The expiration date in the Shared by link view will now be correctly displayed. #39238
It is now possible to register multiple default actions for a certain mimetype. If there is only a single action available, this action will be conducted when the user clicks on the file name. If there are multiple actions available for a certain mimetype, the user will see an "Open with" menu when clicking on the file name. More information can be found in the developer documentation. #39541
All known issues in Server 10.8 have been fixed.
Bugfix: Avoid potential open_basedir errors after upgrade to PHP 7.4.21 #39034
When updating an existing instance to ownCloud 10.9, you may experience that the marketplace is not accessible via ownCloud and content is not shown. If you have this issue, see the following link for details and a procedure how to solve this.
If you use encryption, we recommend not to update to ownCloud 10.9.0 but wait until 10.9.1 will be released in early January 2022. The following issue can occur: If you have an encrypted file which is shared, the file gets corrupted if the share recipient overwrites that file. This means that the latest changes will be lost. If Files Versions has been enabled, you can restore the previous version. The issue has been resolved already and will be available with the next patch release. See the following link for more technical details.
Dear ownCloud administrator, please find below the changes and known issues in ownCloud Server 10.8 that need your attention. You can also read the full ownCloud Server changelog for further details on what has changed.
The all-new web interface for ownCloud, ownCloud Web, has come a long way since its initial release at the end of 2020. It is available as an app on the ownCloud Marketplace and ownCloud Server has been prepared to work with it since version 10.6. ownCloud Web can be deployed as a supplement to the classic web interface and meanwhile it is in use at quite a number of installations. This has brought up good feedback around the integration with ownCloud 10 that has been addressed for 10.8. Additionally, lots of improvements have made their way into ownCloud Web. For an overview you can have a look at the ownCloud Infinite Scale release notes and for a full list of changes, please see the ownCloud Web changelog.
The most prominent recent improvements are
Accessibility: Compliance with WCAG 2.1 / BITV 2.0 (currently in the certification process)
Theming: Ability to change name, logos, colors and more via config file (see the documentation for more information)
Performance improvements in many areas
With all these improvements we want to motivate ownCloud service providers to make ownCloud Web available to users, to experience the new technology as well as to provide feedback to further improve it. The ownCloud Web integration app comes as part of the 10.8 complete bundle. Furthermore, ownCloud Web has a release cycle of 3 weeks that is independent of ownCloud Server. This allows new versions with features, fixes and improvements to be made available regularly via the ownCloud Marketplace and to deploy them with minimal effort.
|ownCloud Web is currently in the status of a Technology Preview. This means that bugs and other undesired behavior are expected. After careful testing, ownCloud Web can be used on production systems. Features are still being added to ownCloud Web and users will need to use the Classic web interface to do certain actions. Please evaluate according to your use case how well the new web interface suits your needs and let us know any feedback that you encounter.|
Both known issues from ownCloud Server 10.7 have been fixed. The deployment of ownCloud Web is now more robust and administrators can optionally decide whether ownCloud Links (public and private links) should be provided by the Classic web interface or by ownCloud Web using a new option in config.php.
As mentioned, features are still being added to ownCloud Web and the new web interface can’t yet cover every use case of the Classic interface. To further shape the new product and to determine the development priorities it is of utmost importance to consider user feedback. We’re very grateful for any hints or feedback that you supply via the following channels
Since the ownCloud Web 3.4.0 release, the survey above is made available in ownCloud Web to allow users to directly report about their experience. If undesired, the feature can be turned off in the ownCloud Web configuration.
The usability of the "Add to ownCloud" feature on public link pages has been improved (#38712). Research on the feature has shown that most users use the feature to add links to the same ownCloud installation they originate from instead of creating federated shares with other ownCloud installations. For this reason there is a new default behavior which allows adding a link to a user account on the ownCloud installation the public link originates from with just a click and without requiring any further input. Advanced users can use a dropdown menu to add a link to a user account on another ownCloud installation.
|New icons have been introduced for this feature. If you’re using a custom theme, it is recommended to check whether the icons have a good contrast.|
The login page has received several improvements regarding design and usability (#38506). A login button and labels for the input fields have been added and the "Alternative login" buttons (e.g., for authentication with OpenID Connect) have been redesigned to give a more modern look and feel. In this context, also the ownCloud Enterprise Theme has received improvements that are shipped with Server 10.8.
|If you’re using a custom theme, it is recommended to check the login page and make sure that all elements appear as desired.|
Performance and caching improvements for external storages (e.g., Windows Network Drives) have been added #38804
Passwords in the external storage configuration can now be stored encrypted in the database (e.g., for Windows Network Drive mount points). With the next release of the Windows Network Drive app, these can also be used to set up the WND Listener. #38728
The external storage settings UI has been improved to prevent accidentally exposing mount points to all users #38795
Invitation links for new users in the local ownCloud user management expire after 12 hours for security reasons. For such cases, administrators can now conveniently re-send invitation emails to new users using the mail icon in the user management. #38774
Events in the activity stream that have been issued by the system (e.g., expired shares or workflow automations like file retention or auto-tagging) are now indicated properly. Before, these events appeared as if the user would have done them manually. To be effective, this requires the latest versions of the Workflow and Activity app versions which are shipped with ownCloud Server 10.8. #38605 #38631
Upgrading from ownCloud Server 10.7 to 10.8 does not involve database migrations. The upgrade duration is, therefore, expected to be short.
Since ownCloud Server 10.5, all supported apps are being shipped as part of the complete bundle for ownCloud Server. Find below a list of updated apps in comparison with the 10.7 complete bundle. More information on the changes can be found in the respective changelogs on ownCloud Marketplace.
Web 3.4.1 (new addition to the bundle)
Announcement Center 1.5.2
Custom Groups 0.6.2
File Firewall 2.10.3
Document Classification 1.3.1
PDF Viewer 0.12.1
Text Editor 2.3.1
Microsoft Office Online 1.5.0
The minimum supported PHP version has been increased from 7.2 to 7.2.5. If you are still running PHP 7.2, ensure that you are running a recent patch release before upgrading to 10.8.
As announced with the release notes of version 10.6, PHP 7.2 support will be dropped in one of the next minor releases. Support is still available with 10.8 but it will be necessary to plan an upgrade soon if PHP < 7.4 is in use.
The auto-removal of inaccessible federated shares has been made more robust #38474
Thumbnail previews for file versions work again #38778
Received shared files/folders can be renamed again without permission checks (only affecting the mount point for the user themself) #38794
An issue that caused the sharing autocomplete dropdown menu not appearing in the Safari browser has been fixed #38831
MOVE operations from encrypted storage to unencrypted storage have been fixed #38567
The performance of MOVE operations has been improved #38649
An issue related to CORS that prevented users from accepting shares has been fixed #38639
Design improvements for the tabs in the right sidebar have been made #38653
Improvements on the files list allow a better readability of file names on small screens #38748
The button to share a user’s federation ID to Google+ has been removed from personal settings since it’s obsolete #38705
For more control over Deleted Files, administrators can now decide if a resource should be deleted immediately instead of moving it to the trash bin. The behavior can be configured based on file extensions, directory names and size using the
trashbin_skipoptions in config.php. #38704
License keys can now be removed with a button in the admin settings #38843
Video playback in ownCloud relies on browser capabilities. If a video cannot be played, users will now see a hint with guidance. #38858
App developers can now exclude default file actions like "Rename" when their app adds a new file view to ownCloud. #38643
All known issues from Server 10.7 have been fixed.
open_basediris configured within your
php.inifile and you update PHP to 7.4.21 or later then unnecessary entries will be logged to the log file about "open_basedir restriction in effect." See issue #39034. This issue will also happen on all other 10.* releases if
open_basediris used with PHP 7.4.21.
Dear ownCloud administrator, please find below the changes and known issues in ownCloud Server 10.7 that need your attention. You can also read the full ownCloud Server changelog for further details on what has changed.
Upgrading from ownCloud Server 10.6 to 10.7 does not involve database migrations. The upgrade duration is, therefore, expected to be short.
Based on user feedback, the user interface for file/folder tagging has been improved. Research has shown that some users misinterpret the tagging input field in the right sidebar as the location to share files/folders. To prevent this, the functionality to manage tags has been separated from the location where tags are displayed. From version 10.7 onwards, tags will be displayed as a read-only list at the top of the right sidebar. Tag management (assign/unassign, etc.) can now be conducted in a dedicated tab "Tags" below.
Based on user feedback, some further usability improvements have been made in the user sharing dialog. In most cases users actually want to share with an internal or a guest user. Therefore, when sharing data by entering an email address, the suggestion to create a federated share will now only be shown when the internal user lookup has finished and did not return any results. As federated user IDs have the same syntax like email addresses (e.g., email@example.com) this measure has been taken to guide users better by only suggesting federated users when no other known users have been found.
Server 10.7 brings improvements for users when there are files that have multiple editor or viewer applications associated. For example, this could be a PDF file that can be opened with the integrated PDF viewer or with a third party application like Collabora Online or OnlyOffice. Previously the classic ownCloud Web interface would just make the decision for the user on click or require the user to use the respective entry in the file’s dropdown menu. Starting with version 10.7, the user will be prompted on click to decide which application they want to use. If there is only a single application available that is capable of opening the file, the behavior stays as before.
Version 10.7 brings improvements for storage encryption in order to reduce storage usage. By changing from
binary encoding for encrypted files, a reduction of about 35% in storage usage can be achieved.
For existing installations that use storage encryption, this process is seamless. Files that have been stored before upgrading to 10.7 will stay with the previous encoding until they are rewritten which will store them with the new encoding.
Storage encryption in ownCloud offers two options, master-key and user-key encryption. While master-key encryption is based on a general encryption key that is used to decrypt all user data, user-key encryption relies in essence on user passwords to decrypt individual user data. Both follow the goal to prevent malicious administrators from being able to read user data. Due to the nature of user-key storage encryption, this encryption mode comes with a list of limitations and can cause challenges for administrators, e.g., when users forget their password. For these reasons, user-key storage encryption is now marked as deprecated and will not be maintained anymore for future versions of ownCloud Server. Server 10.7 still supports user-key encryption but the feature will be removed in later versions. If you are operating an ownCloud installation with user-key storage encryption enabled, please get in contact with firstname.lastname@example.org to plan a migration to master-key storage encryption.
|Master-key storage encryption is still supported and has received improvements with Server 10.7 (see above). This encryption mode can be used with dedicated HSM products for additional security.|
As announced with the release notes of version 10.6, PHP 7.2 support will be dropped in one of the next minor releases. Support is still available with 10.7 but it will be necessary to plan an upgrade soon if PHP < 7.3 is in use.
For strong security, ownCloud Server uses strict same-site cookie handling. In certain scenarios (e.g., integrations) this behavior is not desired. To be able to flexibly adapt the intended behavior, the same-site cookie handling can now be configured. #38458
Loading the "Shared with you" list when shares originate from files on unavailable storages (e.g., Windows Network Drives) has been fixed. #38190
Performance improvements for the "Shared with you" view list have been made. #38385
Existing guest users are now correctly labeled as 'Guest' in the sharing sidebar tab (before they were labeled as regular 'User'). #38440
Issues with multiple files with the same name e.g., in the "Shared by link" view, have been fixed #38415
Error messages when uploading files are more specific again (e.g., when a virus has been found or when an upload was blocked due to a File Firewall rule) #38416
Subfolders from Google Drive can now be mounted. #38161
The right scrollbar in the web interface is more visible now. #38183
The user experience when adding external storages has been improved by clearly indicating success or errors. #38288
There are user groups which cannot be edited manually in user management (e.g., the
guests_appgroup). These groups will not allow adding users anymore to prevent confusion. #38298
Some unnecessary errors in the logs have been removed for cleanliness. #38390
Both known issues from Server 10.6 have been fixed.
When having storage encryption (master key encryption) enabled, there is an issue that prevents Collabora Online (
richdocuments) from working. If you are using this feature combination, please skip the 10.7 upgrade and wait for the next release. In case you have already upgraded to Server 10.7, please get in touch with ownCloud Support to fix the issue. #392
When having ownCloud Web enabled, all public links will open in ownCloud Web instead of the classic UI. This behavior will be made configurable in a follow-up release of ownCloud Server.
When setting up ownCloud Web, it is necessary to be careful with the
web.baseUrlparameter as trailing slashes currently do not work as expected. For example,
https://cloud.example.com/apps/web/should not be used while
https://cloud.example.com/apps/webwill work properly.
This section will be updated when more issues are discovered.
Dear ownCloud administrator, please find below the changes and known issues in ownCloud Server 10.6 that need your attention. You can also read the full ownCloud Server changelog for further details on what has changed.
To allow sharing files with very long names (> 64 characters) via federation, a migration step will run. The impact on upgrade duration depends on the number of federated shares. #37835
PHP 7.2 recently reached its end of life and is not maintained anymore. ownCloud Server will, therefore, drop support in one of the next minor versions as well. If you’re running on PHP lower than 7.3, please make sure to schedule an upgrade to PHP 7.4 as soon as possible. See the system requirements for more information.
ownCloud Server 10.6 comes with the prerequisites to run the new ownCloud Web frontend as an optional component on top of it.
The new server version comes with a switcher to the new frontend ("New Design"). It will be available to users in the apps menu if the address of ownCloud Web is specified in config.php. Likewise, the new frontend comes with a switcher back to the classic frontend ("Classic Design") to allow users to navigate back and forth.
Pre-signed URLs allow proper downloading and streaming of files in ownCloud Web.
A capability for the Favorites feature makes it available in ownCloud Web.
There are different ways to deploy ownCloud Web with ownCloud Server. We strive to make it as easy as possible to make the new frontend available to users. For this, there is the new app for Web on the ownCloud Marketplace. It can be installed on ownCloud 10 servers with the regular tools. The app will make the new frontend available as described above when deployed and configured correctly.
|Deploying ownCloud Web via the Marketplace app is the currently recommended approach.|
Requirements for deploying ownCloud Web as an app for ownCloud Server 10
Federated shares can now also have an expiration date (including default and enforcement options) #37548
SGI images can now be displayed and have thumbnails #37758
When sharing public links via mail, the subject will now be translated #37321
Stability improvements for file checksums with versioning #37934
Manual file locking on the web UI can now be enabled/disabled in the admin settings section "Additional" #37720
When disabling storage encryption, the configuration is now properly cleaned up #35980
Files with names up to 255 characters can now be shared via federation (was limited to 64 before) #36730
A user’s language preference will not be overriden by locales sent by browsers anymore #38073
Fixed some translations not working with themes #38072
Improved output on errors for LDAP user sync #37951
A new occ command
files:troubleshoot-transfer-ownershiphas been added to help finding issues with
Added values to the invalid uid list to prevent creating users with reserved UIDs #37766
The log level of "file locked" exceptions has been reduced to "debug" #37907
Since ownCloud Server 10.5 all supported apps are shipped in the ownCloud Server Complete bundles. The following changes have been made to the bundle for Server 10.6:
There is an issue around when using ownCloud Web with ownCloud Server 10.6. By default when ownCloud Web is enabled, all public links will open in the new ownCloud Web view. Downloading files from ownCloud Web in public links currently lacks some capabilities which make it appear strangely to a user. There is no status indication and progress information until the download has finished in the background. Server 10.7 will fix this issue. #38376
There is an issue with themes which causes some themed icons and logos not to be replaced (the original icon/image will be displayed). The issue will be fixed in the next release. #38246
This section will be updated when other issues are discovered.
Dear ownCloud administrator, please find below the changes and known issues in ownCloud Server 10.5 that need your attention. You can also read the full ownCloud Server changelog for further details on what has changed.
To improve the performance of addressbook search queries (e.g., when looking for federated users to share with), a migration step adds indices for the columns
oc_cards_propertiestable. The impact on upgrade duration can be high depending on the number of rows of the mentioned columns.
To prepare for the new background job for change detection in federated shares (see below), a migration step adds a new column (
lastscan) to the
oc_share_externaltable. The impact on upgrade duration depends on the number of rows in
To enable storing complex WebDAV properties, a migration step adds a new column (
propertytype) to the
oc_dav_propertiestables. The impact on upgrade duration depends on the number of rows in
As announced, in the previous minor release of ownCloud Server, from version 10.5 onward, ownCloud Server no longer supports PHP 7.1. If you’re running on PHP 7.1 or below, it is necessary to upgrade PHP prior to conducting the upgrade to Server 10.5. See the system requirements for more information.
|If you’re using the official Docker containers or the Univention appliance, this has been taken care of already.|
ownCloud Server 10.5 officially supports PHP 7.4. The Server Core and all apps maintained by ownCloud have received a full QA cycle and are proven to work reliably with PHP 7.4. If you are still running a PHP version < 7.2, you must upgrade PHP before upgrading ownCloud Server as lower versions are not supported anymore.
Summarizing, ownCloud Server 10.5 supports the PHP versions 7.2, 7.3 and 7.4.
|See the system requirements in the ownCloud Documentation for the recommended PHP version and for more information.|
|Upgrade PHP to 7.2 or 7.3 then upgrade ownCloud Server to 10.5, then upgrade PHP to 7.4|
|The official ownCloud Docker containers have been updated to Ubuntu 20.04 and are using PHP 7.4.|
ownCloud Server 10.5 comes with great enhancements for content collaboration. Manual file locking allows users to lock files in shared areas while working on them in order to prevent concurrent changes from other users (check-in/check-out).
The feature builds on the WebDAV Locks backend which has been introduced with Server 10.1 and is now available in the ownCloud Web Interface. Using the context menu of files, every user who has access can lock them. Users can recognize locked files by the means of a new lock indicator. While a file is locked, other users can still access it but they can not make any changes. Locked files can manually be unlocked by the lock owner (the user who locked the file; exclusive locking) using the "Locks" tab in the file details view (right sidebar).
|When using the ownCloud clients, file locks will also be respected, meaning local changes can’t be checked-in to locked files and users will see an error message. If there are conflicting local changes and the respective file becomes unlocked, there will be a conflict file that allows to resolve the concurrent changes.|
To prevent files being locked infinitely, there is a mechanism that automatically expires locks after a certain time. The expiration time of locks can be configured via the "Manual File Locking" section in thesettings or using occ commands:
Default timeout for the locks if not specified (in seconds): Maximum lifetime of a lock set via the web interface (or by not specifying a timeout value when calling the WebDAV Locks API)
occ config:app:set core lock_timeout_default --value 1800
Maximum timeout for the locks (in seconds): Maximum lifetime of locks which is allowed to be set by calling the WebDAV Locks API
occ config:app:set core lock_timeout_max --value 86400
By default locks set in the web interface will expire after 30 minutes. The expiration time is bound to the individual locks and can’t be changed after locking. The maximum lock time by default is one day.
|Please change the lock expiration settings according to your needs. Usually you will only need to change the default timeout as that applies to locks set in the web interface.|
The user-facing components in the web interface are disabled by default. Administrators can enable the feature by executing the following occ command:
The ownCloud Marketplace is opening up. With the release of Server 10.5, all apps available on the Marketplace (including ownCloud Enterprise apps) are now also available for download and installation via the Market app. This change facilitates the process of getting started with ownCloud Server and of evaluating Enterprise functionality. Additionally, it allows updates for all apps to be obtained from the ownCloud Marketplace and ensures running up-to-date versions.
In line with the changes to the Marketplace the deliverables for ownCloud Server have been unified. Previously there were different Tarball bundles, Docker images and Linux packages for the Community (bare minimum) and Enterprise (all supported apps) Editions.
Starting with Server 10.5 there are the following bundles which are shipped via tarball, Docker images and Linux packages:
- minimal bundle for the Server and required components, semantically versioned (
- complete bundle for the Server and all supported apps, including the Enterprise features, not semantically versioned as it always contains the latest versions of all supported apps (
The availability of Enterprise features now only depends on the license key.
As part of this process, the former
enterprise_key app has been deprecated and is not used anymore. New versions for all Enterprise apps have been released and included in the Server 10.5 complete bundle. These are needed to work with PHP 7.4 and the new licensing mechanism (see below).
|When upgrading to Server 10.5 it is mandatory to upgrade all apps to the latest versions as well to ensure compatibility with the supported PHP versions and the new licensing mechanism. Using the Server 10.5 complete bundle for upgrading you will get the latest versions of all apps.|
It is mandatory to disable the deprecated
|Practically, for existing installations the change does not make a big difference. Community installations will get all supported Community and Enterprise apps in addition but they are disabled. For Enterprise installations the bundles stay equal. After upgrading it is recommended to check whether the desired apps are enabled/disabled.|
To facilitate the evaluation of ownCloud Enterprise functionality, Server 10.5 comes with a new trial mechanism. Previously, the process to upgrade from a Community installation to an Enterprise trial was not that easy.
With Server 10.5 this process has been changed and made easier: Along with the changes to the Marketplace and in delivery, Enterprise functionality is available in every installation after upgrading or installing, respectively. The apps can be enabled like other apps which will start a grace period if no valid license key is present. During this time the functionality can be fully used and the admin has some time to start a trial. To start 30 days of Enterprise trial, a demo license key can be obtained from a new landing page. As usual, if you do not have a valid license key after the grace period or the 30 day trial, all Enterprise apps will become disabled again. The administrator will be informed and guided to obtain the demo license and can enter it in the web interface. If desired, the location of the landing page can be customized using the config.php option
'grace_period.demo_key.link' ⇒ 'https://owncloud.com/try-enterprise/'.
As mentioned above, Server 10.5 adds new UI elements to set license keys in thesettings. Keys added this way will be stored in the database, not in config.php as before. Still, there is legacy support taking into account when keys have been stored in config.php or license.config.php.
With ownCloud Server 10.2.0 a background job for change detection of nested federated shares was added (
occ incoming-shares:poll) to allow ownCloud Server to discover changes in federated shares in order to make them available for synchronization with the ownCloud Clients. Based on feedback a new, improved background job with more configuration options was added to Server 10.5. It replaces the former occ command which is now deprecated and should not be used anymore after upgrading to 10.5.
In addition to discovering changes ("check"), the new background job also synchronizes meta data changes between involved servers ("scan") making them available without requiring users to actively browse them.
The new background job provides some configuration options to optimize its performance, especially for larger environments: - Minimum amount of hours since the last login of a user that a scan is triggered (limits the execution of discovery & meta data sync to active users which have logged in during the configured time frame) (default: 24h)
occ config:app:set files_sharing cronjob_scan_external_min_login --value <integer-seconds>
Minimum amount of hours since the last scan of a federated share for the next scan to be triggered (avoids frequently scanning the same federated share when it is in active use) (default: 3h)
occ config:app:set files_sharing cronjob_scan_external_min_scan --value <integer-seconds>
Maximum amount of federated shares scanned per execution (scan is only performed if changes in federated shares are discovered) (default: 100)
occ config:app:set files_sharing cronjob_scan_external_batch --value <integer-number>
The new background job is disabled by default and can be enabled/disabled in the
occ config:app:set files_sharing cronjob_scan_external_enabled --value yes.
If enabled, it will be executed as part of the regular ownCloud background job queue and therefore does not need to be added to crontab.
If your instance provides federated sharing, activate the new background job as explained above.
TIP: Remove the
The Add to your ownCloud feature on public link pages is now hidden if an instance has outgoing federated shares disabled (specifically, if Allow users on this server to send shares to other servers is disabled in #37232settings)
Improvements for Oracle DB support #37314
Folder download (as ZIP/TAR archive) now preserves the modification times of the contained files #37222
Users with certain special names (UIDs) reserved by the system can’t be created anymore #37268
Performance improvements for SMB external storages #37451
Strict LDAP login only using LDAP user name and password (instead of e.g., email and password) can now be enforced using
occ config:system:set --type boolean --value true strict_login_enforced#37569
Server 10.5 comes with a new background image on the login page and colors have been adapted to ownCloud CI #37650
ownCloud Server 10.4.1 is a bug fix and maintenance release. You can read the full ownCloud Server changelog for further details on what has changed.
Reshared public links are now shown to the share owner. #36865
Externally encrypted files can now be downloaded. #36921
Improvements have been added to make long-running downloads more stable. #36978
Pending federated shares are now also shown in the "Shared with you" tab and can be accepted/declined there. #37022
files:transfer-ownershipocc command can now also be executed for users who have never logged in. #37038
File download for files without a file extension from Google Drive external storages now works. #37044
The calculation of the remaining upload time in public links has been improved. #37053
E-mail notifications (e.g., for sharing) now respect the
default_languageconfig.php option. #37039
A new occ command (
files:check-cache) is now available. It checks if a target file can be read from the storage and cleans up stored information in ownCloud’s filecache, in case a file disappears from the primary storage. This is mainly important for object stores and should only be utilized in rare cases. #37067
With Server 10.4.0 and 10.4.1, sharing resources with users that have numeric user ids (e.g., "123") does not work in some cases. #37324
Apart from this patch release, please consider the ownCloud Server 10.4.0 release notes, below.
Dear ownCloud administrator, please find below the changes and known issues in ownCloud Server 10.4 that need your attention. You can also read the full ownCloud Server changelog for further details on what has changed.
Upgrading from ownCloud Server 10.3.x to 10.4.0 does not involve database migrations. The upgrade duration is, therefore, expected to be short.
As announced, in the previous release of ownCloud Server, from version 10.4 onward, ownCloud no longer supports PHP 7.0. If you’re running on PHP 7.0, it is necessary to upgrade PHP prior to conducting the upgrade to Server 10.4. We strongly recommend upgrading to PHP 7.2 or 7.3. See the system requirements for more information.
|If you’re using the official Docker containers or the Univention appliance, this has been taken care of already.|
PHP 7.1 recently reached its end of life and is not maintained anymore. ownCloud Server will, therefore, drop support in one of the next minor versions as well. If you’re running on PHP < 7.2, please make sure to schedule an upgrade to PHP 7.2 or 7.3 as soon as possible. See the system requirements for more information.
To give users and administrators more control of access to resources, Server 10.4 introduces an expiration date for user and group shares, just like in public links. With this new feature, users can control the lifetime of shares with other users or groups. Administrators can choose to set a default maximum lifetime and to enforce it. To integrate this change, the UI in the user/group sharing tab of the sidebar has been adapted. When a resource is shared, the user and group entries are expandable and collapsible using the cogwheel next to the trash bin icon to show/hide the permissions and the expiration date field to maintain an overview. Additionally, to allow users to recognize expiring shares at a glance, a new clock indicator will be shown next to the cogwheel.
Administrators can configure the feature in the 'Sharing' section of the admin settings.
ownCloud Server 10.4 puts the focus on user awareness for shared areas to prevent accidentally sharing data or changing other users' data, as well as to make it easier for users to recognize who has access to shared areas. Practically, users are better able to recognize shared resources using a new share overlay indicator on file and folder icons. The indicators are also applied to resources that are not directly shared but are part of a share (when working in a shared folder).
Apart from that, the sharing sidebar panels have been improved to also show users/groups and public links which have access through shares on parent folders. These will be shown as static entries with a "via" indicator that allows users to jump to the parent folder and to change the share properties, if desired.
This sharing information is only shown to share owners (users that created shares) as other share recipients are not entitled to get detailed information about who else has access.
The discontinuation of PHP 7.0 enables support for MariaDB up to version 10.4 and PostgreSQL 10. Server 10.4 is thoroughly tested against these database versions and proven to work stable.
External storages can now be mounted in read-only mode. #36397
Filter options (
--disabled) have been added to the
occ app:listcommand to only show enabled or disabled apps, respectively. #36520
Support for Oracle DB connection strings has been added to be able to use Oracle-specific configuration settings like failover. #36489
Two new config.php options (
excluded_directories_regex) have been added to allow excluding files and folders from ownCloud using regular expressions (e.g., to prevent creating/renaming/scanning certain file types like ".pst"). See config.sample.php for more information. #36360
Previously, when a settings section did not have any panels to display, an "Error" was shown. This has been changed to be more user-friendly. #36776
The memory consumption of the
occ files:checksums:verifycommand has been optimized, and the command will now show progress information. #36787
The memory consumption of the trash bin expiration background job has been optimized. #36565
Folder download via the web interface now works in macOS Catalina. #36722
User creation now allows "" characters in the user id (e.g., to invite guests with mail addresses containing ""). For the change to take effect, you also need to upgrade the
user_ldapapps to the latest version. #36613
File locking actions are not available for public link endpoints anymore. #36402
occ files:transfer-ownershipnow works in S3 multi-bucket setups. #36464
The "Notify by email" button in users/groups sharing now also works when the initiator does not have an email address set. #36505
.partfiles from unfinished uploads via public links will now be cleaned up. #36761
The quota usage calculation of the trash bin retention has been fixed. Previously, it mistakenly counted the space usage of incoming shares toward the user’s quota usage leading to undesired behavior, e.g., when
trashbin_retention_obligationwas set to
auto, the user had a quota set and incoming shares exceeded 50% of this quota. #36494
The command to sync single users from external user backends like LDAP (
occ user:sync -u 'username') does not abort anymore if multiple users matching the search term are returned (e.g., 'alice' could return 'alice' and 'alice1'). It will only abort if none of the results matches the search term (e.g., 'alice' returns 'alice1' and 'alice2'). #36576
When sharing with both a user and a group with the same name, adjusting the permissions of the second entry works again. #36813
The config.php option to enable/disable tech preview APIs (
'dav.enable.tech_preview' ⇒ true) has been removed as it’s obsolete. #36815
A new OCS User Sync API to trigger user sync from external user backends has been added. This allows external user provisioning systems to push new users to ownCloud on demand and removes the necessity to do full user sync. #36428
If the public link expiration policy "days maximum until link expires if password is not set" is enabled, sharing with users and groups will not work. A fix for this issue is currently being developed. If you have already upgraded to ownCloud 10.4.0, please disable this option until the fix is available and deployed on your system. #287
This issue has been resolved with ownCloud Server 10.4.1.
With Server 10.4.0 and 10.4.1, sharing resources with users that have numeric user ids (e.g., "123") does not work in some cases. #37324
ownCloud Server 10.3.2 is a bug fix and maintenance release. You can read the full ownCloud Server changelog for further details on what has changed.
Guest sharing works now even when the sharing restriction
Restrict users to only share with users in their groupsis enabled #36384
When creating a public link on a received shared resource (reshare), users can now send the public link via mail using the web interface if the feature is enabled #36386
occ system:cronnow only shows output when errors occur or when the
--progressoption is added #36298
occ files:transfer-ownershipdoes not collect shares outside of the given path anymore preventing errors #36222
accounts.enable_medial_searchconfig.php setting now also respects federated user search #36225
When using multi-bucket object storage, versioning information is now stored on the object storage instead of the database #36329
When using the
share_folderconfig.php option, the defined folder and its parents can’t be shared anymore #36241
Files/folders can again be shared when a user and a group have the same name #35488
occ files_external:listcan now list mount options by adding
Apart from this patch release, please consider the ownCloud Server 10.3.0 release notes, below.
ownCloud Server 10.3.1 is a bug fix and maintenance follow-up release. You can read the full ownCloud Server changelog for further details on what has changed. It is recommended to schedule an upgrade to this version soon.
Apart from this patch release, please consider the ownCloud Server 10.3.0 release notes, below.
Dear ownCloud administrator, please find, below, the changes and known issues in ownCloud Server 10.3 that need your attention. You can also read the full ownCloud Server changelog for further details on what has changed.
For improved compliance with the OpenCloudMesh protocol specification (Federation) a migration step will convert the fields of the
remoteIdcolumn of the
string. This migration might increase the upgrade duration depending on the number of federated shares.
A repair step has been added that drops the deprecated
contacts_cards_propertiestable. This migration is not expected to increase the upgrade duration significantly.
A housekeeping repair step for the
oc_propertiestable removes existing entries which have
nulland restrict the further creation of such. This repair step is not expected to increase the upgrade duration significantly.
ownCloud Server 10.3 officially supports PHP 7.3. The Server Core and all apps maintained by ownCloud have received a full QA cycle and are proven to work reliably with PHP 7.3. If you are still using version 5.6, you must upgrade PHP before upgrading ownCloud Server as it’s not supported anymore since ownCloud Server 10.2. If you are still running PHP 7.0 or 7.1, please plan an upgrade soon as these versions are or will soon be unsupported, respectively. See the system requirements in the ownCloud Documentation for more information.
For code cleanup reasons, the execution of background jobs (e.g., for public link expiration, trash bin emptying, cleanup of old file versions) has been changed.
The following changes require manual interaction in your installation:
If you’re using System cron to trigger background job execution, there is a new
occ system:cron) which executes the background jobs. To make use of it, you have to change the entry in
crontab. Instead of executing
/usr/bin/php -f /path/to/your/owncloud/cron.php), cron should use
sudo -u www-data ./occ system:cron). As a fallback,
cron.phpwill continue to work with Server 10.3 but will be removed in a later version.
If you’re using Webcron to trigger background job execution you now have to call the new route
../cron.php. As a fallback,
../cron.phpwill continue to work with Server 10.3 but will be removed in a later version.
|See the occ documentation for more information.|
In a later version of ownCloud Server,
|If your ownCloud deployment is based on the official Docker images or the Univention appliance, these changes have already been applied for you.|
The Media Viewer app has recently been released.
The Media Viewer is the next generation image and video file viewer for ownCloud.
It provides a foundation based on new technologies and officially supersedes the former
ownCloud Server 10.3 does not bundle
Instead, it bundles
With this change, support and maintenance for
files_videoplayer are discontinued.
More details on the Media Viewer can be found in the release blog post.
For a clean transition to Media Viewer, it is necessary to disable both deprecated apps before the upgrade using either the admin "Apps" panel in the web interface or via
occ app:disable galleryfollowed by
occ app:disable files_videoplayer).
After the upgrade, enable the Media Viewer app via the admin panel or
occ app:enable files_mediaviewer.
It is not recommended to continue with the deprecated apps. However, if you want to do so, you can copy over the
files_videoplayerdirectory from the
apps/folder of the previous ownCloud Server directory and obtain
galleryfrom the ownCloud Marketplace.
Please do not enable
For more information on the Media Viewer app, visit the ownCloud Documentation.
Server 10.3 comes with improvements for session handling with Redis. These are designed to cope with issues encountered around duplicate session tokens, which make the ownCloud Clients lose their OAuth2 authorization from time to time, and force users to re-authenticate.
The session handling in ownCloud 10.3.0 has been generally improved, making user and client sessions more stable. If Redis is used for session handling, it is necessary to enable Session Locking to ensure that the mentioned issues no longer occur.
You can find out if Redis session handling is configured in your web server if you generate an ownCloud Configreport in the web interface. You will find the value
It is recommended to use Redis Session Locking if Redis is used for session handling (minimum required version for
Enable Redis Session Locking by setting
redis.session.locking_enabled = 1in
|If Redis is just used as a memory cache or not in use at all, you do not have to apply changes.|
|Please note that Redis Session Locking is not supported in clustered Redis environments.|
|If your ownCloud deployment is based on the official Docker images or the Univention appliance, you do not have to apply changes as Redis is not used for session handling (unless you configured it differently using ENV variables).|
To cope for long user names or additional user information and to provide a better overview for users, the user/group sharing autocompletion dropdown has been restructured. The available information is now distributed vertically to improve space usage and user experience. Screenshots are available in the pull request. Other ownCloud clients will align with this behavior with the next releases.
Following the deprecation announcement with ownCloud Server 10.0.9, support for primary and secondary storage via the OpenStack SWIFT protocol has been removed. Please get in contact with ownCloud Support if you’re still using OpenStack SWIFT and want to upgrade.
The extension to integrate S3 object storages as secondary storages (
files_external_s3) has been updated, unbundled from ownCloud Server (was previously part of
files_external) and released to the ownCloud Marketplace.
If you’re using S3 external storage mounts, you have to conduct some steps to ensure continuous operation after upgrading to Server 10.3:
After the upgrade to Server 10.3 has finished successfully, keep the maintenance mode activated and install/enable
files_external_s3(either manually or via the Market app) as the app is not bundled with ownCloud Server anymore.
If users were allowed to configure personal mount points before the upgrade, switch from maintenance mode into single user mode (
occ maintenance:singleuser --on) and enable the option again by ticking the respective checkbox (Amazon S3) below "Allow users to mount external storage" (in Admin settings ⇒ Storage).
Existing storage mount points will remain and do not have to be touched.
Make sure that everything works and disable maintenance/single-user mode to put the installation back into normal operations (
occ maintance:mode --off/
occ maintenance:singleuser --off).
ownCloud Server is being prepared for Phoenix, the upcoming web frontend for ownCloud. As Phoenix is separated from the backend and communicates only via HTTP APIs, it is necessary to complete the API coverage.
The following new HTTP APIs have been added with Server 10.3:
All new endpoints are currently in tech preview state and are mainly used for Phoenix development.
For this reason, they are disabled by default and have to be explicitly enabled using the new config.php option:
'dav.enable.tech_preview' ⇒ true,.
previews_pathconfig option has been added to allow customization of the thumbnail storage path (by default those reside in the user storage). #35131
An Activity entry is now shown when a share receiver unshares a share. #35193
The config.php options
proxyuserpwdwill now be respected to enable federation when an instance needs to go through an authenticated proxy to reach a federated instance. See
config.sample.phpand the Federated Cloud Sharing Configuration documentation for more information.
occ files:scancommand is now case-insensitive for the userid. #35324
dav.enable.tech_preview) has been added to disable tech preview APIs by default. #36124
[PHOENIX] Support for redirecting links to ownCloud Phoenix frontend has been added by introducing a new
config.phpoption which stores the address where Phoenix is reachable (e.g.,
'phoenix.baseUrl' ⇒ 'http://phoenix.example.tld:port'). #35819
The performance when loading groups of users has been improved. #35822
Memory handling for the trashbin expiry background job has been improved. #35708
A new occ command,
encryption:fix-encrypted-version, has been introduced to address issues related to encrypted files no longer being accessible. This originated from a security measure to avoid that encrypted files with the same content look identical. In some cases, users get a
Bad Signatureerror when trying to access files. The new command corrects this behavior, making files accessible again. The command only needs to be run if users report the mentioned error. #115
If an instance uses the
share_folderconfig.php option to gather incoming user shares in a specific folder, this folder cannot be deleted by users anymore. #35998
config.phpoption now also respects federated shares. #35396
user.min_search_lengthconfig.php option now also respects federated users. #35977
Issues with database conversions using the
db:convert-typeocc command (e.g., SQLite to MySQL) have been fixed. This is still in an experimental state and should be tested thoroughly. Please provide feedback if you encounter issues. #35390
File integrity checking has been improved to prevent issues: If a checksum mismatch occurs after uploading a file, the uploaded file and its checksum is deleted to prepare for a clean re-upload. #35294
User/group sharing permission handling
When a share recipient shared a resource with a group the resource owner was a member of (reshare), the resource owner was unable to increase the permissions of the initial share. This has now been fixed. #35884
When a user shared a resource with a group, share recipients (members of the group) were able to remove the share altogether (instead of just unsharing from themselves). This has been fixed. #36120
External storages now return
StorageNotAvailablecorrectly on temporary network failures to prevent associated issues (e.g., Desktop clients will not delete local folders anymore when the storage is temporarily not available). #35707
External storage: Multiple Google Drive external storages can be added again. #34987
The input fields in user administration are not captured by password manager autocompletion anymore. #35931
Storage encryption with a master key in an HSM: Recreating a master key works again. #128
Tech preview for OCS API for public link share email notifications (disabled by default). #36063
Tech preview DAV endpoint for public shares (disabled by default). #35932
Two-factor providers may now display custom challenge messages. #34848
The theming capabilities have been improved by allowing HTML for
LogoClaim. Please check the changes to owncloud/theme-example if you are interested in making use of this in your theme. #35273
A new Roles API has been added to allow clients to query the server for available permissions/roles for user/group sharing and public links. In future client releases, this endpoint will be used to dynamically display roles/permissions depending on the server’s capabilities. You can find out more about it in the Roles API documentation.
|This section will be updated if further issues become known.|
WebDAV Locks: When a file in a folder is locked, exclusively locking the parent folder currently still works ("conflicting lock"; divergent from RFC 4918)
ownCloud Server 10.2.1 is a bug fix and maintenance release taking care of several bugs and known issues. Please find, below, the changes in ownCloud Server 10.2.1 that need your attention. You can also read the full ownCloud Server changelog for further details on what has changed. It is recommended to schedule an upgrade to this version soon, especially if you’re running 10.2.0 already.
|No occ upgrade is required when upgrading from 10.2.0.|
ownCloud Server offers two ways for key management with storage encryption.
Either a central master key pair or individual user key pairs are used to encrypt/decrypt data.
Previously both modes used the same mechanisms which resulted in potentially significant overhead when master key encryption was used as user key encryption relies on so-called
share keys which are necessary to allow share recipients to decrypt shared files.
With master key encryption,
share keys are redundant as you have one central key that can be used to decrypt all files.
Version 10.2.1 corrects this behavior by dropping
share keys for master key encryption, thereby increasing the performance dramatically, especially when sharing folders with many files as said keys do not have to be generated anymore for each file.
Fixed reshare permission issue
An issue in the Sharing API allowed users to increase sharing permissions beyond their own permissions in a reshare scenario: When user A shares a folder "Project" with user B, granting only read and share permission, then the Sharing API allowed user B to reshare a subfolder of "Project" with user C granting full permissions or to create a public link on the shared folder, respectively. This undesired behavior is fixed with 10.2.1.
Fixed issue with Sharing API and enforced public link expiration dates
An issue in the Sharing API caused the ownCloud clients to prevent users from creating public links when the option "Enforce expiration date" for public links is in use. This is now solved.
Fixed known issue with user avatar paths
Version 10.2.0 accidentally changed the location of user avatars making them unavailable and storing uploaded avatar images in the wrong location. 10.2.1 restores the earlier behavior and provides a repair step to move back the avatar images uploaded with 10.2.0 to the right location. As it is not necessary nor possible to run
occ upgradewhen upgrading from 10.2.0 to this patch release, if you are already running 10.2.0 then after installing 10.2.1 you need to run
occ maintenance:repair -s 'OC\Repair\MoveAvatarIntoSubFolder'manually to trigger the repair step.
Fixed known issue with "Password changed" HTML emails rendered in plain text
Fixed use of invalid token on password reset
Password reset links sent to a user were invalid, if the user attempted to login using their e-mail address and an invalid password prior to filling out and submitting the Reset Password form.
Fixed issue when removing a user from a group
Removing a user from a group using the user management UI resulted in an error that required the page to be refreshed to show the changes. This has been corrected.
Added -y option to
The occ command
encryption:encrypt-allnow offers a
-yoption that can be used to automatically answer potential questions with "yes" which is particularly important for automated deployments with Ansible or similar tools.
Fixed an issue with loading JS files when multiple apps folders are in use
Previously ownCloud would have taken the files from the
apps/folder even though there might be newer versions in e.g.
apps-external. This has been changed so that ownCloud will always take the files from the most recent app version.
|Apart from this patch release, please consider the ownCloud Server 10.2.0 release notes.|
Dear ownCloud administrator, please find, below, the changes and known issues in ownCloud Server 10.2 that need your attention. You can also read the full ownCloud Server changelog for further details on what has changed.
Please note that this minor release contains database migrations which impact the upgrade duration. Specifically:
oc_sharetable has a new column. The time the upgrade takes for this change depends on the number of shares in your ownCloud installation.
oc_authtokentable’s login name column size has been increased. The time the upgrade takes for this change depends on the number of recently logged in users, and the number of app passwords that have been created.
Following up the PHP 5.6/7.0 deprecation notice in the ownCloud Server 10.0.8 releases ownCloud Server 10.2 does not support PHP 5.6 and some apps no longer support older PHP versions. Additionally, PHP 7.3 support will be available in an upcoming version.
If you’re still running PHP 5.6, you must upgrade to PHP 7 before upgrading to ownCloud Server 10.2. Please be aware that apps that do not support outdated PHP versions will not upgrade.
To allow for additional upgrade time, version 10.2 still supports PHP 7.0, because some of the major Linux distributions continue to support it. However, support for PHP 7.0 will be discontinued in an upcoming version of ownCloud 10, to enhance both security and performance. To prepare for this change, we strongly encourage you to begin planning an upgrade as soon as possible.
The new server version introduces the means for extensions to implement additional, advanced permissions for user and group sharing. This feature increases sharing flexibility and opens the doors for extension developers to introduce new functionality based on sharing permissions.
Especially, considering collaborative editing solutions, this addition provides the foundation for mode-based document sharing, such as "view-only", "comments-only" or "enforce change tracking". In the future, such advanced permissions should significantly improve the security as well as the usability of review processes, working on Office documents collaboratively, or exchanging information securely.
Based on the new capabilities a set of features has been developed together with Collabora Online, called Secure View. Secure View is designed to enable information distribution processes for sensitive data, meaning that information can be provided securely yet can — under no circumstances — leave the platform.
Practically, it enables users to share documents (such as docx, xlsx, pptx, and PDF files) in such a way that the recipient can’t edit, download, copy and paste, nor print them. Additional protection for screenshots and photos is provided by watermarks which display user information. What’s more, users can decide to allow printing and exporting of documents protected by watermarks as well.
With ownCloud Server 10.2, the former "Download / View / Upload" permission has been renamed to "Download / View / Edit", as this better reflects its behavior (full permissions). Additionally, a new permission ("Download / View / Upload") has been introduced which allows recipients to view, download, and upload contents but not to make any changes to existing content (e.g., rename, move, delete, update). Another way of looking at it is as a public file drop folder for distributing and gathering information with a single link, yet which prevents recipients from altering the existing content.
With version 10.2, ownCloud Server officially supports storage encryption with master keys stored in hardware security modules (HSM). In contrast to regular master key-based storage encryption, which stores the keys on the storage, storage encryption with keys in an HSM allows administrators to completely prevent anyone with access to the storage from accessing the data stored in ownCloud.
As a result, the bundled
encryption app has been updated to support HSM, and a standalone service (
hsmdaemon) that connects ownCloud Server and the HSM device is now available within ownCloud Enterprise Edition.
To get started with storage encryption and HSM, please get in touch with us.
For more information around the different encryption types ownCloud offers, consider this whitepaper.
When using federation to share data across ownCloud instances, deeply nested folders (e.g., folders with many sub-items) are not discovered automatically for performance reasons. This leads to several issues such as the ownCloud Desktop Client not being able to synchronize newly added or changed content unless the user navigates down the hierarchy using the web interface, which manually triggers content discovery.
Also, the size of such folders can’t be calculated, showing "Pending" instead, until the discovery is manually triggered.
To help alleviate this problem, a new
occ command has been introduced.
It can be executed regularly as a background job to discover federated shares (
This is aimed at handling this issue while providing the means for administrators to control resource usage.
When using federation, it is recommended to execute
occ incoming-shares:poll regularly using Cron jobs.
The time interval to choose between executions is a trade-off between the availability of changes in federated shares and resource consumption, which naturally depends a lot on the number of federated shares and the frequency of changes within those shares.
Executing the command once per 12 hours should be safe enough for any instance. However, the interval could be reduced to once per 2 hours for instances with a low number of federated shares.
Depending on the desired resource consumption this value should be lowered or increased based on individual expectations. To find a value that fits a specific setup, it is recommended to execute the command once, measure the execution time and set the interval so that the background job can finish before the next execution is triggered.
ownCloud Server 10.0.9 introduced the Pending Shares feature which allows users to decide whether or not they want to accept local user shares instead of just making the decision for them, giving more control thereby. In contrast, Federated shares always had to be accepted as they can originate from external, potentially untrusted, sources.
ownCloud Server 10.2 introduces a global option to automatically accept federated shares originating from trusted servers. This option enables providers of several instances (e.g., an external and an internal instance) to facilitate or automate data exchange between them, not requiring users to accept shares.
|For security reasons, federated shares from untrusted servers will never be accepted automatically.|
In the spirit of self-service, ownCloud Server 10.2 introduces new options for users that previously were reserved for global admin settings:
As discussed in the section above, there are global options for Pending Shares regarding federated as well as regular user/group shares. To give users more control over the sharing behavior in the scope of their account, user-based override options were introduced that allow users to enable/disable Pending Shares for themselves if the instance’s global setting is disabled (when "Automatically accept new incoming local user shares" is enabled). The two new checkboxes can be found in the 'Sharing' settings panel of personal settings.
In addition to the option "Allow username autocompletion in share dialog" in the global 'Sharing' settings, users can now autonomously decide to opt-out of autocompletion to protect their privacy. When enabled, other users need to enter a user’s full identifier to be able to share with them. This option is not a general override but an opt-out, meaning it can only be used when "Allow username autocompletion in share dialog" is enabled. The new checkbox is available in the 'Sharing' settings panel of personal settings.
Added email footer with motto in email for changing passwords. If you use customized email templates, it is necessary to adapt those to incorporate the footer. Please compare the original templates with your custom templates (
Repair steps can now be executed individually in case one would need to be run again. Repair steps are employed to clean up and resolve issues from former versions. Usually, they run during upgrades, but some scenarios make it necessary to rerun them. To save time when only specific steps need to be taken, administrators can now individually execute them using
occ maintenance:repair --listand
occ maintenance:repair --single "<repair step>".
Command for the first run wizard to reset for all users. In some cases, administrators customize the First Run Wizard in order to distribute information to users. Using
occ firstrunwizard:reset-allyou can reset the popup so that it will appear for each user upon their next login.
Added checkboxes to hide quota and password in user management. The columns in user management have been made more flexible. Using the bottom left cog wheel you can now show/hide the columns for Quota and Password.
By default, the "apps-external" directory is included in config.php during installation. For new installations, there will be two apps directories so that the bundled apps are distinguishable from the apps that were installed or updated by the administrator. Existing installations will not change but, generally, this separation is recommended in all scenarios, as it makes upgrading easier and less error-prone.
occ files:scancommand is used to scan resources on the storage and make them available in ownCloud. While previously it could only be used for all or single users and groups of users, you can now also execute it for groups where the group name contains a comma.
Allow administrators to enable/disable medial search for users and groups. Medial search is used to get search results when typing keys within a search term in autocomplete fields (e.g. when typing "ter" you’ll find "Peter"). Depending on the configuration of available search terms (e.g., attributes from LDAP), search results can deliver better results without medial search. For these reasons medial search can now be enabled/disabled for user (
'accounts.enable_medial_search') and group (
'groups.enable_medial_search') search. See config.sample.php for more information.
Added a new occ command,
background:queue:execute, for running cron jobs manually.
Added two new
statuslists the current background job queue status
deleteremoves a single background job, identified by its id.
Fixed public link share default expiration behavior #34971. Previously, when a default expiration date for public links had been set by an administrator (without enforcement option), the default value has been applied upon link creation even when a user removed it. The only way to create a link without expiration date was to subsequently edit it and remove the expiration date. This has been fixed to work as expected.
Better support for international email addresses after Swiftmailer update #34759
Improved speed of apps list settings page by caching integrity check results #34584
Improved upgrade speed when migrating avatars from oC < 10 #34592
Improved performance and memory usage of account sync service #34546
Store quota overrides in the
oc_preferencestable #34467. In former versions, functionality has been introduced to preserve quota values either imported via LDAP attributes against manual changes by the administrator in ownCloud user management, or via the provisioning API. This functionality works again properly. If you sync accounts from LDAP and have a quota attribute specified in LDAP, each
user:syncrun will set the quota values to the ones from LDAP, no matter if they were changed manually.
Images are again properly rotated now based on EXIF rotation, also affects gallery app #34356
An exception is logged when a background job class is not found - 34723
|This section will be updated if further issues become known.|
Server 10.2 accidentally changes the location of user avatars on the storage from
data/.., making existing avatars unavailable and storing uploaded avatar images in the wrong location. The next release will correct the behavior.
The HTML email that confirms a successful password change is rendered in plain text. Please apply this patch to fix the issue.
WebDAV Locks: When a file in a folder is locked, exclusively locking the parent folder currently still works ("conflicting lock"; divergent from RFC 4918)
It is now possible for apps to specify extra permissions for shares #34951
Add before-after share link auth events #34399
Add events for user preference changes #34820
Added CORS headers for many existing API calls, required for Phoenix #34476
Remove classes that were deprecated since OC 8.0.0: OCP\Config, OCP\PERMISSION_XXX, OCP\Template #34927
A capability has been added to the Capabilities API to allow clients to check whether the server supports the details parameter for private links, e.g., as a direct link to a resource’s sharing or versions tab in the web interface #35104
ownCloud Server 10.1.1 is a hotfix follow-up release that takes care of an issue with loading updated apps. Instead of updating the app versions to their new values in the database, the old version value is written causing the process to repeat with every request.
This issue can cause high load on the database, especially in large installations. If you have already upgraded to 10.1.0, we strongly recommend upgrading to 10.1.1. You can expect minimal downtime for the upgrade to this patch release.
Apart from this patch release, please consider the ownCloud Server 10.1.0 release notes.
Dear ownCloud administrator, please find below the changes and known issues in ownCloud Server 10.1 that need your attention. You can also read the full ownCloud Server changelog for further details on what has changed.
Starting with this release, ownCloud Server and the app ecosystem will follow the principles of Semantic Versioning. This step was taken to benefit operators by clearly indicating the contents and upgrade procedures of new releases via version numbers. Practically, the versioning scheme will follow the "Major.Minor.Patch" (or "Breaking.Feature.Fix") format. App developers need to re-release their apps to make them compatible with the new version. For details, please refer to this blog post.
occ upgrade pulls app updates from the ownCloud Marketplace to make sure that not only the Server itself but also the installed apps are kept up-to-date. In line with the new versioning principles
occ upgrade as well as the Market App now make a difference between major and minor app updates. Practically, this means that during a minor Server upgrade only new minor app versions will be installed. This is to make sure that apps with breaking changes will not be automatically installed when upgrading the Server. The
--major option for
occ upgrade and
occ market:install provides the means for administrators to force installing new major app versions. Additionally, the Market App now includes a version picker to enable administrators to choose which version of an app they want to install or upgrade to.
Version 10.1 delivers all the prerequisites to be compatible with the Microsoft Office Online Server Integration (WOPI) that is about to become available. This enables providers to integrate ownCloud Server with Microsoft’s Office Online Server which brings users the benefits of working on Office documents in the browser as well as collaboratively with other users. The integration will work with MS Office Online Server (on-premise) out-of-the-box. We kindly ask you to get in touch with us if you want to make use of the Office 365 (cloud) version of Office Online.
ownCloud Server 10.1 introduces WebDAV Locks that allow clients to lock and unlock resources to prevent other users from making changes. The feature has been implemented as a prerequisite for manual file locking and MS Office Online Server compatibility. In the current state, file locking is only available via API. Users can recognize locked files via the "lock" icon in the file list. Additionally a lock owner (the user who locked the file) can manually unlock them via the "Locks" tab in the right sidebar. The "Locks" tab will only appear for files that have active locks.
Please note that foreign keys have been added with the :WebDAV Locks feature. This is the first time ownCloud implements foreign keys.
Foreign keys are, by default, disabled in SQLite. You must ensure that foreign keys are enabled in your SQLite installation. Here is what the current documentation says about enabling foreign key support:
To enable foreign key support, the library must be compiled with neither
SQLITE_OMIT_TRIGGERis defined but
SQLITE_OMIT_FOREIGN_KEYis not, then SQLite behaves as it did prior to version 3.6.19 (2009-10-14) - foreign key definitions are parsed and may be queried using PRAGMA foreign_key_list, but foreign key constraints are not enforced. The PRAGMA foreign_keys command is a no-op in this configuration. If
SQLITE_OMIT_FOREIGN_KEYis defined, then foreign key definitions cannot even be parsed (attempting to specify a foreign key definition is a syntax error).
|SQLite is not recommended for production deployments.|
Federation enables instances of ownCloud and other supporting platforms to exchange information. It allows users to share data across installations building a worldwide collaboration network of decentralized nodes - each under the full control of it’s provider. Together with the other vendors the underlying OpenCloudMesh API specification has been shifted to a new level to clean up the interface, improve its stability and to set the foundation for future feature improvements. ownCloud Server 10.1 is compliant with the new specification proposal. The introduction of the new specification does not involve changes in functionality for users.
Version 10.1 comes with a new scope for Collaborative Tags called "Static Tags". In addition to the other tag scopes, these tags are intended to be supplied by administrators and linked with policies in the File Firewall, Document Classification or Workflows, for example. Every user will be able to see these tags assigned to files but only users in specified groups have the permission to assign or unassign them. This makes it possible to equip certain users with the means to impose pre-defined policies upon files. To create such tags administrators need to use the Collaborative Tags Management extension.
The user/group deletion in the users page now has a confirmation dialog to prevent unintentional user deletion
The default public link share name has been changed to be "Public link" instead of formerly the file or folder’s name
Allow loading JSON files in setups with pretty URLs. Please check that the .htaccess file has updated automatically. If not, see https://github.com/owncloud/core/pull/32718/files for the required change.
LDAP users can upload avatars again #33369
Versions list performance improvements #33291
Improved compatibility with third party WebDAV applications (fixed PROPFIND with depth infinity requests through Sabre update) #28341
occ encrypt-allcommand to not attempt re-encrypting already encrypted files #33206
WebDAV Locks: When a file in a folder is locked, exclusively locking the parent folder currently still works ("conflicting lock"; divergent from RFC 4918)
Added "getBucket" method to HomeObjectStore to fix S3 issue #33513
Public JS utility function for email validation #33699
If only the patch level of an app’s version changes no migrations will run when updating #33218
Deprecated Sharing 1.0 PHP APIs which will be removed in ownCloud 11 #33220
Add "uid" argument to Symfony login events for consistency #33470
Dear ownCloud administrator, please find below the changes and known issues in ownCloud Server 10.0.10 that need your attention. You can also read the full ownCloud Server changelog for further details on what has changed.
After announcing the future deprecation of PHP 5.6 and 7.0 with the 10.0.8 release, ownCloud Server now follows up by officially adding PHP 7.2 support. The Server Core and all apps maintained by ownCloud have received a full QA cycle and are proven to work reliably with PHP 7.2. ownCloud Server is also being prepared for PHP 7.3, which is scheduled to become available by the end of 2018.
If you are still using versions 5.6 or 7.0, please plan an upgrade to 7.2 soon. See the system requirements in the ownCloud Documentation.
With PHP 7.2 some extensions have changed. If you have not yet upgraded, you need to install
In previous versions, administrators created local users by entering a username and a password. In many cases this is undesirable, as administrators set the password for new users and need to provide it via a second communication channel. For this reason the local user creation flow has been changed to expect a username and an email address, which will be used to send an activation link to new users.
This way user creation is easier and more secure as new users are informed automatically and can choose a password in self-service. For cases where administrators want to set the initial password, it’s possible to deviate from the default by setting the option "Set a password for new users" on the bottom left settings cog. The former option "Send email to new users" has been removed, as this change made it obsolete.
ownCloud Server 10.0.10 introduces an HTTP API for search functionality. It enables the use of search terms to query the server and the delivery of search results via HTTP (WebDAV). In upcoming releases, ownCloud clients will make use of it to search content on the server, without the need to have them available locally.
In combination with the Full-Text Search integration, which is soon to be released as an ownCloud Server extension (Community Edition), HTTP API for Search will boost usability and productivity for users. For example, they will be able to search through all the content which they store in their account and quickly find files on their smartphones.
Together with the new server version, another security-enhancing extension is available, Brute Force Protection. This extension is tasked with preventing attackers from guessing user passwords (brute-force attack) by delaying subsequent failed login attempts for a user account from the same IP address.
While in the past similar functionality was only achievable via third party applications, such as Fail2Ban, this extension provides the functionality natively, configurable by ownCloud administrators on the Security settings section.
The new extension supersedes the former Security extension together with the ne Password Policy extension, which has been released with ownCloud Server 10.0.9. This community-contributed extension is well-tested, but out of ownCloud’s general support scope. However, individual support can be obtained on request.
The reliability of the file upload feature in the ownCloud web interface has been improved. When uploading larger amounts of data on unreliable connections (e.g., on the train or with mobile data) you have to deal with interruptions and timeouts, which in the past required users to restart stalled uploads from the beginning in the worst case.
On top of ownCloud’s chunking mechanism, which splits large files into pieces and uploads them separately, there’s new logic that takes care of retrying stalled chunks. With this, uploads can now continue from the point they froze when a connection becomes available again.
System groups in ownCloud can have many purposes. They can be used for sharing with many users at once, for feature and access restrictions, or for storage mounts to specific users - just to name a few. In some cases, especially in larger deployments, it’s undesirable that groups which are used for other purposes are also available for sharing. To prevent users from sharing with such groups, administrators can now blacklist the respective system groups using the option "Exclude groups from receiving shares" in the administration settings "Sharing" section.
The occ command
user:resetpassword allows system administrators to reset or change user passwords.
It has been extended to provide the additional options
--output-link, which can be used to send a password reset link to the user via mail and output the password reset link to the command line, respectively.
This change is in line with the new local user creation flow, which is explained above, and can also be used for further processing with scripts.
See the ownCloud Documentation and the
--help option for more information.
To ensure clean and reliable operation of the ownCloud platform it is important to stay up-to-date with the latest releases for the server as well as the clients.
To take care of compatibility between the server and desktop clients, the minimum version the server will accept connections from has been raised to version
While it’s recommended to keep up with later versions, this is the new default value.
It can be changed by altering the config.php parameter
'minimum.supported.desktop.version' ⇒ '2.3.3', if absolutely necessary.
Usually ownCloud renders mail notifications in the language of the recipients, when they are known. For the recently improved feature to send public links with a personal note directly from the user interface, the recipients' language can’t be determined automatically, it just knows the recipients' mail addresses.
ownCloud therefore uses the language of the user who sent the notification, which can have the drawback that recipients can’t understand them. This is still the default behavior but administrators can now change it via a dropdown menu "Language used for public mail notifications for shared files" in the settings "Sharing" section.
Mail templates for share notifications do not strip line breaks from the personal note anymore.
This affects the HTML (
core/templates/mail.php) and plain text (
core/templates/altmail.php) mail templates.
The default templates shipped with ownCloud Server 10.0.10 have been modified to accommodate these changes.
If your custom theme overrides these templates, you have to follow up with the changes:
Replace the following line of the HTML template
p($l→t("Personal note from the sender: %s.", [$['personal_note']]));with
print_unescaped($l→t("Personal note from the sender: <br> %s.", $['personal_note']));.
Replace the following line of the plain text template
print_unescaped($l→t("Personal note from the sender: %s.", [$['personal_note']]));with
print_unescaped($l→t("Personal note from the sender: \n %s.", $['personal_note']));.
Allow automated SSL certificate verifications for CAs other than Let’s Encrypt. See #31858 for further details.
"/" and "%" are now valid characters in group names. See #31109 for further details.
New audit events for login action with token or Apache. See #31985 for further details.
Log entries for exceeding user quota: Loglevel changed to "debug" (Insufficient storage exception is now logged with "debug" log level).
The app for embedding external sites to the app launcher ("external") now supports icons that originate from theme apps.
The occ command to deactivate storage encryption (
occ encryption:decrypt-all) has received stability improvements and can now read the required recovery key from an environment variable which is very helpful for a scripted per-user decryption process.
ownCloud Server 10.0.10 takes care of 10.0.9 known issues and provides remedies for several others:
The Password Policy extension now works with two- or multi-factor authentication extensions. See #32058 for further details.
Versionsfeature now works also when the
Commentsapp is disabled. See #32208 for further details.
E-mail addresses with subdomains with hyphens are now also accepted for public link emails. See #32281 for further details.
Allow null in "Origin" header for third party clients that send it with WebDAV. See #32189 for further details.
Properly log failed message when token based authentication is enforced (Fail2Ban). See #31948 for further details.
Deleting a user now also properly deletes their external storages and storage assignations. See #32069 for further details.
Lockout issues with wrong passwords for Windows Network Drives are mitigated: Fixed mount config in front-end to only load once to avoid side effects. See #32095 for further details.
Fixed update issue related to oc_jobs when automatically enabling market app to assist for update in OC 10. See #32573 for further details.
Fixed missing migrations in files_sharing app and add indices to improve performance. See #32562 for further details.
Fixed issue with spam filters when sending public link emails. See #32542 for further details.
Currently there are no known issues with ownCloud Server 10.0.10. This section will be updated in the case that issues become known.
Add information whether user can share to capabilities API. See #31824 for further details.
loadAdditionalScriptsnow also available for public link page. See #31944 for further details.
Added URL parameter to files app which opens a specific sidebar tab. See #32202 for further details.
Allow slashes in generated resource routes in app framework. See #31939 for further details.
The app for embedding external sites to the app launcher ("external") has been moved to a separate repository. It is still bundled with ownCloud Server releases and can be used normally.
Dear ownCloud administrator, please find below the changes and known issues in ownCloud Server 10.0.9 that need your attention. You can also read the full ownCloud Server changelog for further details on what has changed.
ownCloud Server 10.0.9 introduces new features to close usability gaps and to give users more control over incoming shares. Previously, shared contents would appear, unannounced, in the receiving user’s file hierarchy, and clients would start synchronizing.
Incoming shares can now have a pending state, offering the ability to accept or decline (as known from federated sharing). We anticipate that this will provide a better user experience.
In addition, the recently introduced notifications framework is being used to inform users via mail.
The bell icon in the web interface and the ownCloud Desktop Client can additionally be used to take action.
To switch to the new behavior administrators need to disable the configuration option
Automatically accept new incoming local user shares in the Sharing settings section.
By default the option will be enabled to preserve the known behavior.
Mail notifications do not, currently, support asynchronous batch processing. For this reason, ownCloud will send notification emails directly when initiating shares between users. Due to this limitation, sharing with large groups (> 50 users) can take some time and might cause load peaks. When operating installations with large groups, it is, therefore, not yet recommended to enable the feature.
In addition to the "Pending Shares" feature, ownCloud Server now provides the means to view "accepted", "pending" and "rejected" incoming shares. Leveraging the "Shared with you" filter in the left sidebar of the files view users can now list all incoming shares, their respective states and have the ability to switch between the states easily.
This improvement not only empowers users to accept rejected shares subsequently but also to restore shares that have been unshared before without requiring the owner to share it again.
To prepare ownCloud Server for new capabilities in the authentication process, we have introduced an authentication middleware, and a new major version of the Password Policy extension is now available.
Offers a defined way of inserting mandatory functionality between user authentication and user account access. For example, forcing users to accept legal agreements.
Affords the ability to interact with the user during the login process, such as retrieving user details like their email address.
The authentication middleware is currently focused on offering new features for the Password Policy extension.
The Password Policy Extension has got a new major release and has been relicensed (OCL ⇒ GPLv2) to be available for community and standard subscription users as well. It now supports password expiration and history policies for user accounts.
These features don’t apply to users imported from LDAP or other backends but only for local users created by administrators or the Guests extension.
Imposing password expiration and history policies enhances security for a number of reasons. For example, by forcing users to choose a new password, they can be prevented from using one or more of their previous passwords. In doing this, it encourages them to not use a previous password, which may be known to attackers.
Two further examples are manually expiring passwords and configuring the number of days that have to pass since the last change before the password expires. These help ensure that users change their passwords on a semi-regular basis, making them harder to crack.
However, we encourage administrators to always consider the implication of their password policies, so that they strike an appropriate balance between security and usability. For example, a high frequency of password changes, for instance, might increase security but could also decrease user satisfaction.
To help ensure a good user experience it is possible to configure:
Internal notifications (they appear on the web interface and clients).
The password history count.
The days before reminder notification are sent.
Users will always be informed when passwords have expired.
Although the above two password practices are discouraged by NIST, ownCloud is now fully compliant with common password guidelines in enterprise scenarios.
When users employ tokens for client authentication, which can be configured on the user settings page ("App passwords"), those are not affected from password policies.
When imposing password expiration policies on an existing installation it is necessary to take some further actions. Please consult `the ownCloud documentation`_ for guidance.
ownCloud Server 10.0.9 comes with the prerequisites to be ready for the new S3 Objectstore implementation "files_primary_s3", which will massively improve performance, reliability and protocol-related capabilities. The new extension is available as a technology preview via the ownCloud Marketplace and will supersede the current Objectstore extension.
It has received extensive testing and is in very good shape. However, there is no out-of-the-box migration from the current Objectstore to files_primary_s3 as this will require individual guidance.
Due to changes to the Versioning API, the ownCloud Ransomware Protection is not yet compatible with files_primary_s3. For now the Objectstore extension will continue to work as usual. Once the new implementation leaves the technology preview state and migrations have been taken care of, the current implementation will be deprecated.
As the markets are moving in the direction of the S3 protocol to communicate with object storages, ownCloud will follow this path with a clear focus. To do this, it will be a necessity to deprecate object storage via the OpenStack SWIFT protocol.
The extension will still be available as part of ownCloud Server, but it will neither be maintained nor developed any further by ownCloud, and support will be discontinued. Please make sure to move to the S3 protocol to use object storage as primary storage with future ownCloud Server versions.
In the "General" Administration settings section
Via the following OCC commands:
sudo -u www-data ./occ config:app:set core legal.imprint_url <link>
sudo -u www-data ./occ config:app:set core legal.privacy_policy_url <link>
These links can be displayed on all pages of the ownCloud web interface and in the footer of mail notifications. When using one of the default themes provided by ownCloud, as well as the default mail templates, configured links will be automatically included.
For customized themes or mail templates, actions are required to include the links. These are:
Add the following at the end of each HTML template to add the footer:
<?php print_unescaped($this→inc('html.mail.footer', ['app' ⇒ 'core'])); ?>
Add the following at the end of each plain text template to add the footer:
<?php print_unescaped($this→inc('plain.mail.footer', ['app' ⇒ 'core'])); ?>
The option "Exclude groups from sharing", in the administration settings "Sharing" section, enables administrators to exclude groups of users from the ability to initiate file shares. In previous versions this restriction only applied to users who were members of exactly these groups (membership of one or more non-excluded groups bypassed the restriction).
This behavior has been changed to be both more restrictive and to better cover the expectations of administrators. With ownCloud Server 10.0.9, it will apply to all users who are members of at least one of the excluded groups.
In ownCloud Server 10.0.8, the value for minimum characters to trigger the sharing autocomplete mechanism <min-chars-for-sharing-autocomplete-label> has been made configurable and set to 4 by default. As this security-enhancing change came at the expense of usability, and might only be required in special scenarios, the default value has been reverted to 2.
For increased security requirements, the
'user.search_min_length' ⇒ 2 can be adjusted. To further improve
usability, a hint has been added to inform users about the required
character count, to get suggestions.
To improve the usability of the
occ user:list command, the output has
been made configurable by using the
-a option, for including certain
attributes. This change has mainly been introduced to facilitate
automation tasks. Check the
--help option for more information.
New events are available for audit logging, among others. These include:
Changes in user specific settings
Sending public links via mail; and
Accepting and rejecting shares
When logs are forwarded to external analyzers, like Splunk,
administrators can check to add the new events. The latest version of
the Auditing extension (
admin_audit) is required.
HTML templates for
lost passwordmails have been added. This is important in case a custom theme is used and it needs manual adjustments.
The mail notifications framework, introduced with ownCloud Server 10.0.8 <new-mail-notifications-feature-label>, has been extended to provide a basic framework and notification structure, which can be used by ownCloud features and third party extensions. To support this, mail template wording and structure have been updated. Please review the templates in
apps/notifications/templates/mail/to align them with your needs.
Mail templates can now include a footer for HTML (
core/templates/html.mail.footer.php) and plain text mails (
core/templates/plain.mail.footer.php). The default templates shipped with ownCloud Server 10.0.9 contain the respective references. For customized mail templates, it is necessary to manually add the references. To do so:
Add the following at the end of each HTML template: :
<?php print_unescaped($this->inc('html.mail.footer', ['app' => 'core'])); ?>
Add the following at the end of each plain text template: :
<?php print_unescaped($this->inc('plain.mail.footer', ['app' => 'core'])); ?>
The ownCloud example theme (
theme-example), which can be used as a solid base to create custom themes, is no longer bundled with ownCloud Server. It now lives in it’s own repository on GitHub.
ownCloud Server 10.0.9 takes care of 10.0.8 known issues, and provides remedy for several others:
Issues with multiple theme apps and the Mail Template Editor #31478
OCC command to transfer data between users (
occ transfer:ownership) works as expected again. Previously, public link shares were not transferred. See #31176 for further details.
OCC commands to encrypt (
occ encryption:encrypt-all) and decrypt (
occ encryption:decrypt-all) user data work correctly again. Previously, shares might have been lost during the encryption process. See #31600 and #31590 for further details.
Files larger than 10 MB can now properly be uploaded by guest users. See #31596 for further details.
Issues with public link dialog when collaborative tags app is disabled has been resolved. See #31581 for further details.
Enabling/disabling of users by group administrators in the web UI works again. See #31489 for further details.
Issues with file upload using Microsoft EDGE are now circumvented (hard memory limit of 5 GB causing uploads to fail randomly as garbage collection for file chunks did not work properly). See #31884 for further details.
Does not work together with Multi-Factor Authentication (e.g.
twofactor_privacyidea). Please do not deploy expiration policies yet when having Two- or Multi-Factor Authentication extensions in place. This issue will be solved with the next ownCloud Server release. See #32059 for more information.
The new Password Policy feature "Password Expiration" includes an occ command to manually force password expiration. Please run it directly after imposing expiration policies on an instance with existing users. Currently the command will only work when the policy X days until user password expires has been enabled. This might be confusing and will be solved with the next release of the extension. See #66 for more information.
The symfony event for logging has been extended to include the original exception when applicable: #31623
Added Symfony event for whenever user settings are changed #31266
Added Symfony event for whenever a public link share is sent by email #31632
Added Symfony event for whenever local shares are accepted or rejected #31702
Dear ownCloud administrator, please find below the changes and known issues in ownCloud Server 10.0.8 that need your attention. You can also read the full ownCloud Server changelog for further details on what has changed.
PHP 5.6/7.0 active support has ended on January 19th 2017 / December 3rd 2017 and security support will be dropped by the end of 2018. Many libraries used by ownCloud (including the QA-Suite PHPUnit) will therefore not be maintained actively anymore which forces ownCloud to drop support in one of the next minor server versions as well. Please make sure to upgrade to PHP 7.1 as soon as possible. See the system requirements in the ownCloud documentation.
One of the usability enhancements of ownCloud Server 10.0.8 is the possibility for users to add a personal note when sending public links via mail. When using customized mail templates it is necessary to either adapt the shipped original template to the customizations or to add the code block for the personal note to customized templates in order to display the personal note in the mail notifications.
ownCloud Server 10.0.8 introduces a new extensible notification framework. Apart from technical changes under the hood the Notifications app can now also send mails for all notifications that previously were only displayed within the web interfaces (notification bell) or on the Desktop client (notifications API) like incoming federated share or Custom Group notifications, for example. In the "General" settings section users can configure whether they want to receive mails for all notifications, only for those that require an action or decide not to get notifications via mail (by default users will only receive notifications when an action is required).
When disabling or deleting user accounts in LDAP, the administrator can choose to either delete or disable respective accounts in ownCloud when executing
-m, --missing-account-action=MISSING-ACCOUNT-ACTION). User accounts that are disabled in ownCloud can now be re-enabled automatically when running
occ user:syncif they are enabled in LDAP. When this behavior is desired administrators just need to add the
-r, --re-enableoption to their cron jobs or when manually executing
Furthermore it is now possible to execute
occ user:synconly for single (
-u, --uid=UID) or seen (
-s, --seenOnly) users (users that are present in the database and have logged in at least once). These new options provide more granularity for administrators in terms of managing
Another notable change in behavior of
occ user:syncis that administrators now have to explicitly specify the option
-c, --showCountto display the number of users to be synchronized.
New events have been added to be used for audit logging, among others. These include configuration changes by administrators and users, file comments (add/edit/delete) and updating existing public links. When logs are forwarded to external analyzers like Splunk, administrators can check to add the new events. The latest version of the Auditing extension (admin_audit) is required.
With ownCloud 10 file integrity checking by computing and matching
checksums has been introduced to ensure that transferred files arrive at
their target in the exact state as their origin. In some rare cases
wrong checksums can be written to the database leading to
synchronization issues with e.g. the Desktop Client. To mitigate such
situations a new command
occ files:checksums:verify has been
introduced. The command recalculates checksums either for all files of a
user or for files within a specified path, and compares them with the
values in the database. Naturally the command also offers an option to
repair incorrect checksum values (
-r, --repair). Please check the
available options by executing
occ files:checksums:verify --help.
Note: Executing this command might take some time depending on the file
For security reasons the default value for minimum characters to trigger
the sharing autocomplete mechanism has been set to "4" (previously it
was set to "2"). This is to prevent people from easily downloading
lots of email addresses or user names by requesting their first letters
through the API. As it is a trade-off between security and usability for
some scenarios this high security level might not be desirable.
Therefore the value now is configurable via the config.php option
'user.search_min_length' ⇒ 4,. Please check which value fits your
With ownCloud 10 the
File Drop feature has been merged with public
link permissions. This kind of public link does not give recipients
access to any content, but it gives them the possibility to
files. As a result, it might not always be desirable to enforce
password protection for such shares. Given that, passwords for public
links can now be enforced based on permissions (read-only, read &
write, upload only/File Drop). Please check the administration settings
`Sharing` section and configure as desired.
By verifying signature files the integrity check ensures that the code
running in an ownCloud instance has not been altered by third parties.
Naturally this check can only be successful for code that has been
obtained from official ownCloud sources. When providing custom apps
(like theme apps) that do not have a signature, the integrity check will
fail and notify the administrator. These apps can now be excluded from
the integrity check by using the config.php option
'integrity.ignore.missing.app.signature' ⇒ ['app_id1', 'app_id2', 'app_id3'],.
See config.sample.php for more information.
It is now possible to modify user details like display names or mail
addresses via the command
occ user:modify. Please append
Apart from using the
occ files:scan command for single users and
whole instances it can now be executed for groups using
-g, --groups=GROUPS. Please append
--help for more information.
When using syslog as the log type (
'log_type' ⇒ 'syslog', in
config.php) the default format has been changed to include request
IDs for easier debugging. Additionally the log format has been made
'log.syslog.format' in config.php. If you require
a certain log format, please check the new format and
config.sample.php on how to change it.
For security reasons federated sharing (sharing between different
ownCloud instances) strictly requires HTTPS (SSL/TLS). When this
behavior is undesired the insecure fallback to HTTP needs to be enabled
explicitly by setting
'sharing.federation.allowHttpFallback' ⇒ false,
true in config.php.
Upgrading to 10.0.8 includes migrations related to auth_tokens (app passwords). When users have created app passwords as separate passwords for their clients the upgrade duration will increase depending on user count. Please consider this when planning the upgrade.
When the "Sharing" settings option
Allow users to send mail notifications for shared files for public
links is enabled, users can send public links via mail from within the
web interface. The behavior of the autocomplete when entering mail
addresses in the public link share dialog has been changed. Previously
the autocomplete queried for local users, users from federated address
books and contacts from CardDAV/Contacts App. As public links are not
intended for sharing between ownCloud users (local/federated), those
have been removed. Contacts synchronized via CardDAV or created in the
Contacts app will still appear as suggestions.
occ notifications:generate can be used to send notifications to individual users or groups.
With 10.0.8 it is also capable of including links to such notifications using the
-l, --link=LINK option.
--help for more information.
There is also Announcement center
to conduct such tasks from the web interface but it is currently limited to send notifications to all users.
For now administrators can use the
occ command if more granularity is required.
For security reasons ownCloud has a Same-Origin-Policy that prevents
requests to ownCloud resources from other domains than the domain the
backend server is hosted on. If ownCloud resources should be accessible
from other domains, e.g. for a separate web frontend operated on a
different domain, administrators can now globally specify policy
exceptions via CORS (Cross-Origin Resource Sharing) using
'cors.allowed-domains' in config.php. Please check
config.sample.php for more information.
The Mail Template Editor has been unbundled from the default apps and is not shipped with the Server anymore. When upgrading ownCloud will try to automatically install the latest version from the ownCloud Marketplace in case the app was installed before.
If this is not possible (e.g. no internet connection or clustered setup) you will either need to disable the app
occ app:disable templateeditor) or
download and install it manually.
Login failedlog entries have been removed (see 10.0.7 known issues)
The Provisioning API can now properly set default or zero quota
User quota settings can be queried through Provisioning API
A regression preventing a user from setting their e-mail address in the settings page has been fixed
File deletion as a guest user works correctly (trash bin permissions are checked correctly)
Issues with multiple theme apps and Mail Template Editor
As of ownCloud Server 10.0.5 it is only possible to have one theme app enabled simultaneously. When a theme app is enabled and the administrator attempts to enable a second one this will result in an error. However, when also having the Mail Template Editor enabled in this scenario the administrators "General" settings section will be displayed incorrectly. As a remedy administrators can either uninstall the second theme app or disable the Mail Template Editor app.
occ transfer:ownershipdoes not transfer public link shares if they were created by the target user (reshare).
The global JS variable
oc_current_userwas removed. Please use the public method
Lots of new Symfony events have been added for various user actions, see changelog for details, or the documentation ticket.
When requesting a private link there is a new HTTP response header
Webdav-Locationthat contains the WebDAV path to the requested file while the
Locationstill points at the frontend URL for viewing the file.
ownCloud Server 10.0.7 is a hotfix follow-up release that takes care of an issue regarding OAuth authentication.
Please consider the ownCloud Server 10.0.5 release notes.
ownCloud Server 10.0.6 is a hotfix follow-up release that takes care of an issue during the build process (https://github.com/owncloud/core/pull/30265). Please consider the ownCloud Server 10.0.5 release notes.
Dear ownCloud administrator, please find below the changes and known issues in ownCloud Server 10.0.5 that need your attention. You can also read the full ownCloud Server changelog for further details on what has changed.
ownCloud catches up with new web technologies. This has mainly been introduced for the open-source community to test and give feedback. PHP 7.2 is not yet supported nor recommended for production scenarios. ownCloud is going to fully support PHP 7.2 with the next major release.
Please make sure to have the PHP extension installed before upgrading.
The theming behavior has been changed so that only a single theme can be active concurrently. This change ensures that themes can not interfere in any way (e.g., override default theming in an arbitrary order). Please make sure to have the desired theme enabled after upgrading.
Please switch to the new External Storage: Dropbox app with Dropbox API v2 support to continue providing Dropbox external storages to your users.
ownCloud Server 10.0.4 known issue is resolved.
Known issues are resolved: Mail Template Editor works again, got support for app themes and additional templates were added for customization.
Mail Template Editor is still bundled with ownCloud Server but will soon be released as a separate app to ownCloud Marketplace.
When using application passwords, log entries related to
Login Failedwill appear, please upgrade to 10.0.7 and check the fix mentionned in its release notes.
Dear ownCloud administrator, please find below the changes and known issues in ownCloud Server 10.0.4 that need your attention. You can also read the full ownCloud Server 10.0.4 changelog for further details on what has changed.
The "Restrict users to only share with users in their groups" option, in the Sharing settings, restricts users to only share with groups which they are a member of, while simultaneously prohibiting sharing with single users that do not belong to any of the users’ groups.
To make this more granular, we split this option into two parts and added "Restrict users to only share with groups they are member of", which differentiates between users and groups. Doing so makes it possible to restrict users from sharing with all users of an installation, limiting them to only being able to share with groups which they are a member of, and vice versa.
The ownCloud sharing dialog displays users according to their display name. As users can choose their display name in self-service (which can be disabled in config.php) and display names are not unique, it is possible that a user can’t distinguish sharing results.
To cover this case the displayed user identifiers are now configurable. In the Sharing settings administrators can now configure the display of either mail addresses or user ids.
We recommend to use this command when directed to do so in the upgrade process. Please refer to the occ command’s files:scan --repair documentation for more information.
Administrators can use the output of this command when using a network firewall, to check the appropriateness of configured rules or to get assistance when setting up.
As ownCloud needs to behave differently when operating in a clustered setup versus a single instance setup, the new
operation.mode has been added.
It can take one of two values:
'operation.mode' ⇒ 'clustered-instance',.
Currently the Market App (ownCloud Marketplace integration) does not support clustered setups and can do harm when used for installing or updating apps. The new config setting prevents this and other actions that are undesired in cluster mode.
When operating in a clustered setup, it is mandatory to set this option. Please check the config_sample_php_parameters documentation for more information.
When file uploads are interrupted for any reason, already uploaded file parts (chunks) remain in the underlying storage so that the file upload can resume in a future upload attempt. However, resuming an upload is only possible until the partial upload is expired and deleted, respectively.
To clean up chunks (expire and delete) originating from unfinished uploads, administrators can use this newly introduced command. The default expiry time is two days, but it can be specified as a parameter to the command.
It is recommended to configure CRON to execute this background job regularly.
It is not included in the regular ownCloud background jobs so that the administrators have more flexibility in scheduling it. Please check the background jobs configuration documentation for more information.
When administrators did intentional changes to the ownCloud code they
now have the ability to exclude certain files from the integrity
checker. Please check
config.sample.php for the usage of
When upgrading to 10.0.4 migrations may increase update duration dependent on number of files.
Users with outdated browsers might get warnings. See the list of supported browser versions.
When using application passwords, log entries related to
Login Failedwill appear, please upgrade to 10.0.7 and check the fix mentioned in its release notes.
Dear ownCloud administrator, please find below the changes and known issues of ownCloud Server 10.0.3 that need your attention:
The full ownCloud Server 10.0.3 changelog can be found here: https://github.com/owncloud/core/blob/stable10/CHANGELOG.md
It is now possible to directly upgrade from 8.2.11 to 10.0.3 in a single upgrade process.
Added occ command to list routes which can help administrators setting up network firewall rules.
occ upgradeis now verbose by default. Administrators may need to adjust scripts for automated setup/upgrade procedures that rely on `occ upgrade' outputs.
Reenabled medial search by default::
Enables partial search in sharing dialog autocompletion (e.g. a user wants to share with the user "Peter": Entering "pe" will find the user, entering "ter" will only find the user if the option is enabled)
New default is set to enabled as there is no performance impact anymore due to the introduction of the user account table in ownCloud Server 10.0.1.
Please check the setting. You need to disable it explicitly if the functionality is undesired.
All database columns that use the fileid have been changed to bigint (64-bits). For large instances it is therefore highly recommended to upgrade in order to avoid reaching limits.
Upgrade and Market app information::
appstoreenabledsetting from config.php. If you want to disable the app store / Marketplace integration, please disable the Market app.
Added setting `upgrade.automatic-app-update' to config.php to disable automatic app updates with `occ upgrade' when Market app is enabled
On upgrade from OC < 10 the Market app won’t be enabled if
appstoreenabledwas false in config.php.
Clustering: Better support of read only config file and apps folder
Default minimum desktop client version in config.php is now 2.2.4.
Added quotes in boolean result values of
Setting up SFTP external storages with keypairs does not work. https://github.com/owncloud/core/issues/28669
If you have storage encryption enabled, the web UI for encryption will ask again what mode you want to operate with even if you already had a mode selected before. The administrator must select the mode they had selected before. https://github.com/owncloud/core/issues/28985
Uploading a folder in Chrome in a way that would overwrite an existing folder can randomly fail (race conditions). https://github.com/owncloud/core/issues/28844
Federated shares can not be accepted in WebUI for SAML/Shibboleth users
For MariaDB users: Currently, Doctrine has no support for the breaking changes introduced in MariaDB 10.2.7, and above. If you are on MariaDB 10.2.7 or above, and have encountered the message
1067 Invalid default value for `lastmodified, please apply this patch to Doctrine. We expect this bug to be fixed in ownCloud 10.0.4. For more information on the bug, check out the related issue.
When updating from ownCloud < 9.0 the CLI output may hang for some time (potentially up to 20 minutes for big instances) whilst sharing is updated. This can happen in a variety of places during the upgrade and is to be expected. Please be patient as the update is performed and the output will continue as normal.
Hello ownCloud administrator, please read carefully to be prepared for updates and operations of your ownCloud setup.
A new update path: ownCloud 10.0.1 contains migration logic to allow upgrading directly from 9.0 to 10.0.1.
Marketplace: Please create an account for `the new marketplace`_. Access to optional ownCloud extensions and enterprise apps will be provided by the marketplace from now on. Currently some apps are still shipped with the tarballs / packages and will be moved to the marketplace in the near future.
Apps: LDAP, gallery, activity, PDF viewer, and text editor were moved to the marketplace.
Updates with marketplace: During the upgrade, enabled apps are also updated by fetching new versions directly from the marketplace. If during an update, sources for some apps are missing, and the ownCloud instance has no access to the marketplace, the administrator needs to disable these apps or manually download and provide the apps before updating.
App updates: Third party apps are not disabled anymore when upgrading.
Upgrade migration test: The upgrade migration test,
--skip-migration-tests, has been removed.
The template editor app is not included in the 10.0.1 release due to technical reasons, but will be distributed via the marketplace. However, you can still edit template files manually.
Settings design: Admin, personal pages, and app management are now merged together into a single "Settings" entry.
Disable users: The ability to disable users in the user management panel has been added.
Password Policy: Rules now apply not only to link passwords but also to user passwords.
Client: You need to update to the latest desktop client version.
Cron jobs: The user account table has been reworked. As a result the Cron job for syncing user backends, e.g., LDAP, needs to be configured.
Logfiles: App logs, e.g., auditing and owncloud.log, can now be split, see: Configuring Logging.
Converting a Database from e.g.
occ db:convert-type currently doesn’t work. See
https://github.com/owncloud/core/issues/27075 for more info.
This causes an SQL error such as the following:
sudo -u www-data ./occ market:install user_ldap user_ldap: Installing new app ... user_ldap: An exception occurred while executing 'CREATE TABLE `ldap_user_mapping` (`ldap_dn` VARCHAR(255) DEFAULT '' NOT NULL, `owncloud_name` VARCHAR(255) DEFAULT '' NOT NULL, `directory_uuid` VARCHAR(255) DEFAULT '' NOT NULL, UNIQUE INDEX ldap_dn_users (`ldap_dn`), PRIMARY KEY(`owncloud_name`)) DEFAULT CHARACTER SET utf8mb4 COLLATE utf8mb4_bin ENGINE = InnoDB ROW_FORMAT = compressed': SQLSTATE[42S01]: Base table or view already exists: 1050 Table 'ldap_user_mapping' already exists
This can be safely ignored. And the app can be used after enabling it.
Please be aware that when upgrading an existing ownCloud installation
that already has
user_ldap this error will not occur. It was fixed by
https://github.com/owncloud/core/pull/27982. However, this could happen
for other apps as well that use
database.xml. If it does please use the same workaround.
We will re-enable SSO for LDAP users with an update of the app in the market after completing internal testing.
To uninstall, disable the app with occ and rm the app directory.
All shares, comments, and tags on the moved files will be lost.
Existing LDAP users only show up in the user management page and the share dialog after being synced
The account table introduced in ownCloud 10.0.0 significantly reduces
LDAP communication overhead. Password checks are yet to be accounted
for. LDAP user metadata in the account table will be updated when users
log in or when the administrator runs
occ user:sync "OCA\User_LDAP\User_Proxy".
We recommend setting up a nightly Cron job to keep metadata of users not actively logging in up to date.
PHP 7.1 support added (supported PHP versions are 5.6 and 7.0+)
The upgrade migration test has been removed; (Option
"--skip-migration-tests"removed from update command)
Requires to use the latest desktop client version 2.3
Third party apps are not disabled anymore when upgrading
User account table has been reworked. CRON job for syncing with e.g., LDAP needs to be configured (see Syncing User Accounts for more information)
LDAP app is not released with ownCloud 10.0.0 and will be released on the marketplace after some more QA
files_drop app is not shipped anymore as it’s integrated with core now. Since migrations are not possible you will have to reconfigure your drop folders (in the `Public Link' section of the sharing dialog of the respective folders).
SAML/Shibboleth with device-specific app passwords: No migration possible; Users need to regenerate device-specific app passwords in the WebUI and enter those in their clients.
For security reasons status.php can now be configured in config.php to not return server version information anymore (`version.hide'; default `false'). As clients still depend on version information this is not yet recommended. The default will change to `true' with 10.0.2 once clients are ready.
Order of owncloud.log entries changed a bit, please review any application (e.g. fail2ban rules) relying on this file
FTP external storage moved to a separate app (https://marketplace.owncloud.com/apps/files_external_ftp)
"Local" storage type can now be disabled by sysadmin in config.php (to prevent users mounting the local file system)
Full changelog: https://github.com/owncloud/core/wiki/ownCloud-10.0-Features
Background jobs (cron) can now run in parallel
Update notifications in client via API - You can now be notified in your desktop client about available updates for core and apps. The notifications are made available via the notifications API.
Multi-bucket support for primary objectstore integration
Support for Internet Explorer below version 11 was dropped
Symlinks pointing outside of the data directory are disallowed. Please use the configuration/files/external_storage_configuration_gui with the configuration/files/external_storage/local storage backend instead.
occ. Users planning to upgrade from ownCloud 9.0 or below to ownCloud 9.1 needs to make sure that their calendars and address books are correctly migrated before continuing to upgrade to 9.1.
Pluggable authentication: plugin system that supports different authentication schemes
Ability to invalidate sessions
List connected browsers/devices in the personal settings page. Allows the user to disconnect browsers/devices.
Device-specific passwords/tokens, can be generated in the personal page and revoked
Disable users and automatically revoke their sessions
Detect disabled LDAP users or password changes and revoke their sessions
Log in with email address
Configuration option to enforce token-based login outside the web UI
Two Factor authentication plug-in system
OCC command added to (temporarily) disable/enable two-factor authentication for single users
|The current desktop and mobile client versions do not support two-factor yet, this will be added later. It is already possible to generate a device specific password and enter that in the current client versions.|
Ability to toggle displaying hidden files
Remember sort order
Permalinks for internal shares
Visual cue when dragging in files app
Autoscroll file list when dragging files
Upload progress estimate
Ability to create federated shares with CRUDS permissions
Resharing a federated share does not create a chain of shares any more but connects the share owner’s server to the reshare recipient
UTF-8 NFD encoding compatibility support for NFD file names stored directly on external storages (new mount option in external storage admin page)
Direct links to the configuration pages for setting up a GDrive or Dropbox application for use with ownCloud
Some performance and memory usage improvements for GDrive, stream download and chunk upload
Performance and memory usage improvements for Dropbox with stream download
GDrive library update provides exponential backoff which will reduce rate limit errors
The WebDAV endpoint was changed from
/remote.php/dav. You need to check your Apache configuration if you have exceptions or rules for WebDAV configured.
Support for print style sheets
Command line based update will now be suggested if the instance is bigger to avoid potential timeouts
Web updater will be disabled if LDAP or shibboleth are installed
DB/application update process now shows better progress information
occ files:scan --unscannedto only scan folders that haven’t yet been explored on external storages
Chunk cache TTL can now be configured
Added warning for wrongly configured database transactions, helps prevent
database is lockedissues
Use a capped memory cache to reduce memory usage especially in background jobs and the file scanner
Allow login by email
Respect CLASS property in calendar events
Allow addressbook export using VCFExportPlugin
Birthdays are also generated based on shared addressbooks
New DAV endpoint with a new chunking protocol aiming to solve many issues like timeouts (not used by clients yet)
New webdav property for share permissions
Background repair steps can be specified info.xml
Background jobs (cron) can now be declared in info.xml
Apps can now define repair steps to run at install/uninstall time
Export contact images via Sabre DAV plugin
Sabre DAV’s browser plugin is available in debug mode to allow easier development around webdav
PSR-4 autoloading forced for
OCP\, optional for
OCA\docs at xref:next@server:developer_manual:app/fundamentals/classloader.adoc
More cleanup of the sharing code (ongoing)
9.0 requires .ico files for favicons. This will change in 9.1, which will use .svg files. See Changing favicon in the Developer Manual.
Home folder rule is enforced in the user_ldap application in new ownCloud installations; see configuration/user/user_auth_ldap. This affects ownCloud 8.0.10, 8.1.5 and 8.2.0 and up.
The Calendar and Contacts apps have been rewritten and the CalDAV and
CardDAV backends of these apps were merged into ownCloud core. During
the upgrade existing Calendars and Addressbooks are automatically
migrated (except when using the
IMAP user backend). As a fallback for
failed upgrades, when using the
IMAP user backend or as an option to
test a migration
dav:migrate-addressbooks scripts are available (only in ownCloud
9.0) via the
occ command. See configuration/server/occ_command.
After upgrading to ownCloud 9.0 and before continuing to upgrade to 9.1 make sure that all of your
and your users Calendars and Addressbooks are migrated correctly. Especially when using the
Updates on systems with large datasets will take longer, due to the addition of checksums to the ownCloud database. See https://github.com/owncloud/core/issues/22747.
Linux packages are available from our
official download site.
New in 9.0: split packages.
ownCloud plus dependencies, including Apache and PHP.
installs only ownCloud. This is useful for custom LAMP stacks, and
allows you to install your own LAMP apps and versions without packaging
conflicts with ownCloud. See installation/linux_installation.
New option for the ownCloud admin to enable or disable sharing on individual external mountpoints (see External Storage GUI Mount Options). Sharing on such mount points is disabled by default.
owncloud-enterprise packages are no longer available for CentOS 6, RHEL6, Debian 7, or any version of Fedora. A new package, owncloud-enterprise-files, is available for all supported platforms, including the above. This new package comes without dependencies, and is installable on a larger number of platforms. System administrators must install their own LAMP stacks and databases.
New location for Linux package repositories; ownCloud admins must manually change to the new repos. See maintenance/upgrade
PHP 5.6.11+ breaks the LDAP wizard with a `Could not connect to LDAP' error. See https://github.com/owncloud/core/issues/20020.
config.php is set to 0 by default. This
prevents unnecessary update checks and improves performance. If you are
using external storage mounts such as NFS on a remote storage server,
set this to 1 so that ownCloud will detect remote file changes.
XSendFile support has been removed, so there is no longer support for
serving static files from your ownCloud server.
LDAP issue: 8.2 uses the
memberof attribute by default. If this is not
activated on your LDAP server your user groups will not be detected, and
you will see this message in your ownCloud log:
Error PHP Array to string conversion at /var/www/html/owncloud/lib/private/template/functions.php#36.
Fix this by disabling the
memberof attribute on your ownCloud server
occ command, like this example on Ubuntu Linux:
sudo -u www-data ./occ ldap:set-config "s01" useMemberOfToDetectMembership 0
sudo -u www-data ./occ ldap:show-config to find the correct
sNN value; if there is not one then use empty quotes,
Users of the Linux Package need to update their repository setup.
Use APCu only if available in version 4.0.6 and higher. If you install
an older version, you will see a
APCu below version 4.0.6 is installed, for stability and performance reasons we recommend to update to a
newer APCu version warning on your ownCloud admin page.
SMB external storage now based on
php5-libsmbclient, which must be downloaded from the ownCloud software repositories
Download from link feature has been removed.
index.html files in the
data/ directory are now
updated after every update. If you make any modifications to these files
they will be lost after updates.
The SabreDAV browser at
/remote.php/webdav has been removed.
Using ownCloud without a
trusted_domain configuration will not work
The logging format for failed logins has changed and considers now the
proxy configuration in
A default set of security and privacy HTTP headers have been added to
.htaccess file, and ownCloud administrators may now
customize which headers are sent.
More strict SSL certificate checking improves security but can result in
cURL error 60: SSL certificate problem: unable to get local issuer
certificate errors with certain broken PHP versions. Please verify
your SSL setup, update your PHP or contact your vendor if you receive
The persistent file-based cache (e.g. used by LDAP integration) has been
dropped and replaced with a memory-only cache, which must be explicitly
configured. See configuration/user/user_auth_ldap. Memory cache
configuration for the ownCloud server is no longer automatic, requiring
installation of your desired cache backend and configuration in
config.php (see configuration/server/caching_configuration.)
OC_User_HTTP backend has been removed. Administrators are
encouraged to use the
user_webdavauth application instead.
ownCloud ships now with its own root certificate bundle derived from Mozilla’s root certificates file. The system root certificate bundle will not be used anymore for most requests.
When you upgrade from ownCloud 8.0, with encryption enabled, to 8.1, you must enable the new encryption backend and migrate your encryption keys.
Encryption can no longer be disabled in ownCloud 8.1. It is planned to re-add this feature to the command line client for a future release.
It is not recommended to upgrade encryption-enabled systems from ownCloud Server 8.0 to version 8.1.0 as there is a chance the migration will break. We recommend migrating to the first bugfix release, ownCloud Server 8.1.1.
Due to various technical issues, by default desktop sync clients older
than 1.7 are not allowed to connect and sync with the ownCloud server.
This is configurable via the
Previews are now generated at a maximum size of 2048 x 2048 pixels. This
is configurable via the
preview_max_y switches in
The ownCloud 8 server is not supported on any version of Windows.
The 8.1.0 release has a minor bug which makes application updates fail at first try. Reload the apps page and try again, and the update will succeed.
forcessl option within the
config.php and the
Enforce SSL option within the Admin-Backend was removed.
This now needs to be configured like described in
Hardening and Security Guidance.
WebDAV file locking was removed in ownCloud 8.1 which causes Finder on macOS to mount WebDAV read-only.
When you are configuring the LDAP user and group backend application, ownCloud may not auto-detect the LDAP server’s port number, so you will need to enter it manually.
There is no preview icon displayed for text files when the file contains fewer than six characters.
When you mount a Federated Cloud share from a remote ownCloud server, you cannot re-share it with your local ownCloud users. (See Federated Cloud Sharing Configuration to learn more about federated cloud sharing)
If you are using the Encryption application and upgrading from older versions of ownCloud to ownCloud 8.0, you must manually migrate your encryption keys.
If Multiviews are enabled in your Apache configuration, this may cause problems with content negotiation, so disable Multiviews by removing it from your Apache configuration. Look for lines like this:
<Directory /var/www/owncloud> Options Indexes FollowSymLinks Multiviews
Multiviews and restart Apache.
ownCloud’s file scanner does not follow symlinks, which could lead to infinite loops. To avoid this do not use soft or hard links in your ownCloud data directory.
Creating an ownCloud group with a comma in the group name causes ownCloud to treat the group as two groups.
On Windows servers Hebrew file names grow to five times their original size after being translated to Unicode.
Google Drive tries to download the entire file into memory, then write it to a temp file, and then stream it to the client, so very large file downloads from Google Drive may fail with a 500 internal server error.
When you activate the Encryption application on a running server that has large numbers of files, it is possible that you will experience timeouts. It is best to activate encryption at installation, before accumulating large numbers of files on your ownCloud server.
The SharePoint Drive application does not verify the SSL certificate of the SharePoint server or the ownCloud server, as it is expected that both devices are in the same trusted environment.
Federated Cloud Sharing (formerly Server-to-Server file sharing)does not work with Shibboleth .
When files are uploaded directly to a SWIFT share mounted as external storage in ownCloud, the files do not appear in ownCloud. However, files uploaded to the SWIFT mount through ownCloud are listed correctly in both locations.
The current SWIFT implementation is incompatible with any application that uses direct file I/O and circumvents the ownCloud virtual filesystem. Using the Encryption application on a SWIFT object store incurs twice as many HTTP requests and increases latency significantly.
When you are configuring the LDAP user and group backend application, ownCloud may not auto-detect the LDAP server’s port number, so you will need to enter it manually.
Prior to 7.0.4, LDAP searches were substring-based and would match search attributes if the substring occurred anywhere in the attribute value. Rather, searches are performed on beginning attributes. With 7.0.4, searches will match at the beginning of the attribute value only. This provides better performance and a better user experience.
Substring searches can still be performed by prepending the search term
*. For example, a search for
te will find Terri, but not Nate:
occ ldap:search "te"
If you want to broaden the search to include Nate, then search for
occ ldap:search "*te"
Refine searches by adjusting the
User Search Attributes field of the
Advanced tab in your LDAP configuration on the Admin page. For example,
if your search attributes are
sn you can find users by
first name + last name very quickly. For example, you’ll find Terri
Hanson by searching for
te ha. Trailing whitespaces are ignored.
Under certain circumstances, running your ownCloud server on IIS could be at risk of data loss. To prevent this, follow these steps.
In your ownCloud server configuration file,
config.phpfile to read-only.
When you make server updates
config.phpmust be made writeable. When your updates are completed re-set it to read-only.
The Antivirus application offers three modes for running the ClamAV
anti-virus scanner: as a daemon on the ownCloud server, a daemon on a
remote server, or an executable mode that calls
clamscan on the local
server. We recommend using one of the daemon modes, as they are the most
Some ownCloud applications have the option to be enabled only for certain groups. However, when you select specific groups they do not get access to the app.
For security and performance reasons, file previews are available only for image files, covers of MP3 files, and text files, and have been disabled for all other filetypes. Files without previews are represented by generic icons according to their file types.
Because of limitations in
phpseclib, you cannot upload files larger
than 4GB over SFTP.
Setting user quotas to
unlimited on an ownCloud installation that has
unreliable free disk space reporting– for example, on a shared hosting
provider– may cause file uploads to fail with a
Not Enough Space
Available error. A workaround is to set file quotas for all users
In older versions of ownCloud, you could set an expiration date on both local and public link shares. Now you can set an expiration date only on public link shares, and local shares do not expire when public link shares expire.
Setting a user’s storage quota should be the equivalent of read-only, however, users can still create empty files.
Federated Cloud Sharing (formerly Server-to-Server file sharing) does not work with Shibboleth .
Windows Network Drive runs only on Linux servers because it requires the Samba client, which is included in all Linux distributions.
php5-libsmbclient is also required, and there may be issues with older
libsmbclient; see Using External Storage > Installing and
Configuring the Windows Network Drive application in the Enterprise
Admin manual for more information.
By default CentOS has activated SELinux, and the
httpd process can not
make outgoing network connections. This will cause problems with curl,
LDAP and samba libraries. Again, see Using External Storage > Installing
and Configuring the Windows Network Drive application in the Enterprise
Admin manual for instructions.
The SharePoint Drive application does not verify the SSL certificate of the SharePoint server or the ownCloud server, as it is expected that both devices are in the same trusted environment.
Shibboleth and standard WebDAV are incompatible, and cannot be used together in ownCloud. If Shibboleth is enabled, the ownCloud client uses an extended WebDAV protocol
SQLite is no longer an installation option for ownCloud Enterprise Edition, as it not suitable for multiple-user installations or managing large numbers of files.